156-01026 Side-Mount Edge Cable Tie for 3–6 mm Panels
Tổng quan
The YOCL Electric 156-01026 side-mount edge cable tie secures cables and wire harnesses directly to 3.0–6.0 mm panel edges. The pre-assembled two-piece assembly combines a cable tie with an edge fixing containing an integrated metal clamp.
The side-mount configuration positions the cable bundle alongside the panel edge. Its 148.0 × 3.6 × 1.1 mm strap accommodates Ø1.5–35.0 mm bundles and has a minimum tensile strength of 135 N. The tie head can be repositioned after bundling for final harness alignment.
Tính năng
- Direct attachment to 3.0–6.0 mm panel edges without a mounting hole.
- Side-mount configuration for routing cables alongside the panel.
- Integrated metal clamp engages the edge during push-on installation.
- Pre-assembled two-piece construction with a repositionable tie head.
- Heat-stabilized PA66HS tie and high-impact-modified, heat-stabilized PA66HIRHS fixing.
- Black color with RoHS compliance.
Thông số kỹ thuật
The 135 N value describes cable tie tensile strength. Edge-fixing retention and the load capacity of the installed assembly require separate application checks.
Kích thước
Check the panel thickness, actual bundle diameter and space around the fixing together when selecting the mounting position.
Ứng dụng
- Automotive wiring and vehicle body harnesses.
- Cable routing along structural panels and equipment frames.
- Industrial machinery, electrical equipment and panel building.
- Transportation equipment and appliance wiring.
Ghi chú lắp đặt
- Check that the panel edge is 3.0–6.0 mm thick and provides clearance for the fixing.
- Align the side-mount edge fixing with the selected edge and push it into position by hand.
- Check that the integrated metal clamp has engaged the panel.
- Wrap the strap around a bundle within the Ø1.5–35.0 mm range and tighten it to secure the cables.
- Reposition the tie head as needed, then check the fixing and bundle retention.
Thông tin đặt hàng
Specify part number 156-01026, the required quantity, panel thickness and intended bundle diameter when contacting YOCL Electric about an order.
