156-00644 Edge Clip Cable Tie

YOCL Electric 156-00644 secures cable, wire, pipe and hose bundles directly to a panel edge using a preassembled cable tie and side-mount edge clip.

Fits 1.0–3.0 mm panel edges and Ø4.0–31.0 mm bundles.
Black 150.0 × 4.6 mm outside serrated tie; minimum tensile strength 225 N.
PA66HS tie and PA66HIRHS clip with an integrated metal retaining clamp.
Push-on clip installation requires no mounting hole, screw or adhesive base.
Operating temperature: −40 to +105 °C.

استفسر عن هذا المنتج

نظرة عامة

The YOCL Electric 156-00644 edge clip cable tie secures wires, cables, pipes and hoses directly to a compatible panel edge. Its preassembled two-piece construction combines a cable tie with a side-mount edge clip for automotive harnesses and industrial cable routing.

The clip pushes onto 1.0–3.0 mm thick panels. An integrated metal clamp grips the edge, providing a fixing point without a mounting hole, screw or adhesive base.

الميزات

Direct edge fixing: Push-on mounting for routing bundles along panel edges.
Outside serrated strap: The smoother inner surface contacts the cable bundle.
Repositionable head: The tie head can be repositioned after bundling to suit the routing layout.
Separate component materials: PA66HS for the tie and PA66HIRHS for the clip.
Non-releasable tie: Secures bundles from Ø4.0 to 31.0 mm with a minimum tensile strength of 225 N.

المواصفات الفنية

المعلمة	المواصفات
Brand	YOCL كهربائي
Part number	156-00644
الإنشاء	Preassembled, two-piece
Fixing method	Side-mount edge clip with integrated metal retaining clamp
Panel thickness	1.0–3.0 mm
Bundle diameter	Ø4.0–31.0 mm
Minimum tie tensile strength	225 N
Cable tie material	PA66HS — heat stabilized polyamide 6.6
Clip material	PA66HIRHS — high impact modified, heat stabilized polyamide 6.6
Color	أسود
Serration	Outside serrated
Releasable	No
Mounting hole required	No
درجة حرارة التشغيل	−40 to +105 °C
Material flammability classification	UL 94 HB

الأبعاد

الأبعاد	Value
Tie length (L)	150.0 mm
Tie width (W)	4.6 mm
Tie thickness (T)	1.3 mm
Height (H2)	15.5 mm
Clip length (L2)	14.0 mm
Clip width (W2)	12.0 mm

التطبيقات

Automotive wiring harnesses and vehicle electrical systems.
Cable routing along panel and sheet-metal edges.
Control cabinets, panel building and industrial machinery.
Wire, pipe and hose bundle fixing.

Installation and Ordering

Check the panel thickness and bundle diameter against the specified ranges. Push the clip onto the panel edge, wrap the tie around the bundle and feed the strap through its locking head. Tighten the tie and reposition the head if needed. The edge clip can be fitted by hand.

For a quotation, specify part number 156-00644, the required quantity, panel thickness and bundle diameter.