156-00410 M6 Screw-Mount Heavy-Duty Cable Tie

The YOCL ELECTRIC 156-00410 M6 screw-mount heavy-duty cable tie secures cable bundles, wire harnesses, hoses and tubing to panels or structural mounting points.

M6 screw fixing with an integrated metal bushing; maximum tightening torque 8 N·m.
Bundle diameter 15.0–50.0 mm; 225 N minimum cable tie tensile strength.
Inside-serrated tie: 200 × 4.6 × 1.2 mm.
Pre-assembled two-piece construction with a repositionable tie head.
Black PA66HIRHS tie and fixing body; operating temperature −40°C to +105°C, UL 94 HB classification and RoHS compliance.

استفسر عن هذا المنتج

نظرة عامة

The YOCL ELECTRIC 156-00410 M6 Screw-Mount Heavy-Duty Cable Tie is a pre-assembled, two-piece fastening for securing cable bundles, wire harnesses, hoses and tubing to panels or structural mounting points. Its fixing base incorporates a metal bushing for M6 screw mounting, with a specified maximum tightening torque of 8 N·m.

The 200 mm inside-serrated tie accommodates 15.0–50.0 mm bundle diameters and has a minimum tensile strength of 225 N. The tie head can be repositioned after bundling to adjust harness alignment. Both the tie and fixing body use black PA66HIRHS, a high-impact modified, heat-stabilized Polyamide 6.6.

الميزات

M6 mechanical fixing: provides a screw-mounted attachment point for the cable bundle.
Integrated metal bushing: reinforces the screw mounting area and supports the stated maximum tightening torque.
Two-piece assembly: combines the cable tie and fixing base in a pre-assembled fastening.
Repositionable tie head: supports final routing adjustments after bundling.
Inside-serrated strap: secures bundles using a plastic-pawl locking mechanism.
PA66HIRHS construction: high-impact modified, heat-stabilized PA66 for both polymer components.

المواصفات الفنية

Parameter	Specification
Brand	YOCL كهربائي
Part number	156-00410
Product type	M6 screw-mount heavy-duty cable tie
الإنشاء	Pre-assembled, two-piece assembly
Fixing method	Screw mounting
Screw size	M6
Mounting reinforcement	Integrated metal bushing
Maximum screw tightening torque	8 N·m
Bundle diameter	15.0–50.0 mm
Maximum loop diameter	50 mm
Minimum cable tie tensile strength	225 N
Cable tie material	PA66HIRHS
Fixing component body material	PA66HIRHS
Polymer description	High-impact modified, heat-stabilized Polyamide 6.6
Colour	Black
Serration	Inside serrated
Closure	Plastic pawl
Tie head positioning	Repositionable after bundling
Operating temperature	−40°C to +105°C
Flammability classification	UL 94 HB
RoHS	Compliant

الأبعاد

الأبعاد	Value
Cable tie length (L)	200 mm
Cable tie width (W)	4.6 mm
Cable tie thickness (T)	1.2 mm
Overall height (H)	16.0 mm
Fixing length (L2)	37.5 mm
Fixing width (W2)	20.0 mm
Bundle diameter range	15.0–50.0 mm
Maximum loop diameter	50 mm
Mounting screw size	M6

Installation Notes

Align the fixing base with a compatible M6 mounting point and insert the screw through the metal-bushed mounting area. The supplied specification gives 8 N·m as the maximum tightening torque for this fixing; select an installation torque compatible with the complete mounting arrangement.

Wrap the tie around the bundle, insert the strap through the locking head and tighten it. Reposition the tie head as required for the final routing direction, then check the screw fixing and bundle retention.

The 225 N specification refers to minimum cable tie tensile strength. It is not an installation tension or a screw-mount working-load rating.

التطبيقات

Automotive wire harness and engine wiring assemblies.
Commercial-vehicle and transportation-equipment cable routing.
Corrugated tubing, flexible conduit and hose fixing.
Cable management in industrial machinery.
Screw-mounted harness routing in electrical equipment.

Ordering Information

Specify 156-00410, the required quantity, the M6 mounting arrangement and bundle diameter when requesting a quotation. This model has a black PA66HIRHS tie and fixing body, a metal mounting bushing, and a 200 mm inside-serrated strap for 15.0–50.0 mm bundles.