HSWH-B4X 4:1 أنابيب انكماش حراري شبه صلبة مزدوجة الجدار للسيارات
YOCL ELECTRIC HSWH-B4X أنابيب انكماش حراري شبه صلبة للسيارات تجمع بين طبقة خارجية من البولي أوليفين مقاومة للتآكل ومادة لاصقة تذوب بالحرارة لربط الوصلات والموصلات وفروع الكابلات.
- 4 الاسمي:1 نسبة الانكماش؛ ستة أحجام من 4 mm إلى 18 mm.
- يختلف سمك الجدار المستعاد والمادة اللاصقة حسب الحجم؛ الطول القياسي: 1.22 م.
- الانكماش الأولي: ≥70°C؛ الانكماش الكامل: ≥125°C.
- درجة حرارة التشغيل: -45°C إلى +125°C.
- مقاومة للتآكل، مقاومة لـ UV ومتوافقة مع RoHS.
- اللون القياسي: أسود؛ ألوان مخصصة متاحة.
نظرة عامة
YOCL ELECTRIC HSWH-B4X أنابيب انكماش حراري شبه صلبة للسيارات تحمي وصلات ضفيرة الأسلاك، والموصلات الكهربائية، وفروع الكابلات حيث تكون الحماية الميكانيكية والختم البيئي مطلوبين. توفر طبقتها الخارجية شبه الصلبة من البولي أوليفين مقاومة التآكل والعزل، بينما تساعد المادة اللاصقة الداخلية الذائبة بالحرارة على ختم الكابل أو المكون الأساسي.
تسمح نسبة الانكماش الاسمية 4:1 بمرور الأنبوب فوق الموصلات والأطراف والمكونات غير المنتظمة الأكبر قبل الانكماش حول كابل أو حزمة أصغر. أثناء التسخين، تلين المادة اللاصقة وتتدفق حول السطح؛ بعد التبريد، تساعد على تكوين واجهة واقية ضد الماء والرطوبة والتآكل.
The series offers six standard sizes with supplied internal diameters from 4 mm to 18 mm, all in 1.22 m standard lengths.
الميزات
- Semi-rigid outer layer: Provides mechanical and abrasion protection for automotive harness areas exposed to rubbing or contact with surrounding components.
- Nominal 4:1 recovery: Accommodates substantial differences between installation and final cable diameters.
- Adhesive-lined dual wall: Combines external insulation and wear protection with internal environmental sealing.
- Harness-focused applications: Suitable for wire splices, connectors, branch points and repairs.
- UV resistance: Specified for applications involving ultraviolet exposure.
- Color options: Black is standard; custom colors available.
المواصفات الفنية
| المعلمة | المواصفات |
|---|---|
| Brand | YOCL كهربائي |
| السلسلة | HSWH-B4X |
| Product type | Semi-rigid dual-wall adhesive-lined heat shrink tubing |
| Primary application | Automotive wire harnesses |
| Shrink ratio | 4:1 Nominal |
| Outer layer | Semi-rigid polyolefin |
| Inner layer | Hot-melt adhesive |
| Supplied I.D. range | 4–18 mm |
| Number of sizes | 6 |
| Maximum recovered I.D. limits | 0.95–4.45 mm, according to size |
| Recovered total wall | 1.40–2.60 mm nominal, depending on size |
| Adhesive layer thickness | 0.60–1.34 mm nominal, depending on size |
| Standard length | 1.22 m |
| Initial shrink temperature | ≥70°C |
| Full shrink temperature | ≥125°C |
| درجة حرارة التشغيل | -45°C to +125°C |
| Wear resistance | Yes |
| UV resistance | Yes |
| Environmental standard | RoHS |
| Standard color | أسود |
| Custom colors | Available |
Initial and full shrink temperatures describe recovery during installation; the operating range describes service conditions.
Outer-Layer Performance
| Property | المواصفات | Supplied test method or condition |
|---|---|---|
| Tensile strength | ≥10.4 MPa | ASTM D2671 |
| Elongation at break | ≥200% | ASTM D2671 |
| Tensile strength after aging | ≥7.3 MPa | 158°C × 168 h |
| Elongation after aging | ≥100% | 158°C × 168 h |
| Axial change | -8% to +8% | ASTM D2671 |
| Flame retardancy | Pass | ASTM D2671 |
| Thermal shock | No cracks, no dripping | ASTM D2671; 250°C × 4 h |
| Cold bending flexibility | No crack | ASTM D2671; -40°C × 4 h |
| Water absorption | ≤0.50% | ASTM D2671 |
| Breakdown strength | ≥15 kV/mm | IEC 60243 |
| Volume resistivity | ≥10¹⁴ Ω·cm | IEC 60093 |
Heat aging, thermal shock and cold bending temperatures are test conditions. The specified operating range remains -45°C to +125°C.
Hot-Melt Adhesive Performance
| Property | المواصفات | Supplied test method |
|---|---|---|
| Softening point | 95 ± 5°C | ASTM E28 |
| Water absorption | <0.2% | ASTM D570 |
| Peel strength, first listed value | ≥120 N/25 mm | ASTM D1000 |
| Peel strength, second listed value | ≥80 N/25 mm | ASTM D1000 |
The two peel-strength values are supplied without identifying the substrate associated with each value. The adhesive-layer water absorption and outer-layer water absorption are separate material properties.
الأبعاد
| Size | Supplied I.D. | Max. I.D. After Recovery | Recovered Total Wall Thickness | Adhesive Layer Thickness | Standard Length |
|---|---|---|---|---|---|
| 2/13″ / 4.0 mm | ≥4.0 mm | ≤0.95 mm | 1.40 ± 0.30 mm | 0.60 ± 0.20 mm | 1.22 m |
| 1/4″ / 6.0 mm | ≥6.0 mm | ≤1.27 mm | 1.70 ± 0.30 mm | 0.80 ± 0.20 mm | 1.22 m |
| 5/16″ / 8.0 mm | ≥8.0 mm | ≤1.65 mm | 2.00 ± 0.30 mm | 0.95 ± 0.20 mm | 1.22 m |
| 2/5″ / 10.0 mm | ≥10.0 mm | ≤2.00 mm | 2.30 ± 0.40 mm | 1.10 ± 0.20 mm | 1.22 m |
| 1/2″ / 12.0 mm | ≥12.0 mm | ≤2.41 mm | 2.45 ± 0.40 mm | 1.20 ± 0.20 mm | 1.22 m |
| 3/4″ / 18.0 mm | ≥18.0 mm | ≤4.45 mm | 2.60 ± 0.40 mm | 1.34 ± 0.30 mm | 1.22 m |
The inch/mm pairs retain the supplied nominal size designations. Use the stated supplied and recovered I.D. limits for selection. The shrink ratio is nominal; the recovered diameter limits are listed individually for each size.
Recovered Wall and Adhesive Thickness
Nominal recovered total wall thickness increases from 1.40 mm for the 4 mm size to 2.60 mm for the 18 mm size. Nominal adhesive-layer thickness increases from 0.60 mm to 1.34 mm across the same range. The table lists the size-specific tolerances.
The recovered wall, semi-rigid outer layer and adhesive lining combine mechanical protection with environmental sealing. During heating, the adhesive flows into gaps around the cable, wire bundle or component.
دليل الاختيار
Select HSWH-B4X where a semi-rigid, wear-resistant outer layer is required around automotive harness joints, branches or connectors. Choose from the 4, 6, 8, 10, 12 and 18 mm supplied sizes. Check that the supplied I.D. passes over the largest component and that the maximum recovered I.D. suits the smaller cable or bundle requiring sealing.
For example, the 10.0 mm size has supplied I.D. ≥10.0 mm, maximum recovered I.D. ≤2.00 mm, recovered total wall thickness 2.30 ± 0.40 mm and adhesive-layer thickness 1.10 ± 0.20 mm. Check wall thickness and axial change against the available space and required coverage.
HSWH-B4X and HS4X Construction
| Feature | HSWH-B4X | HS4X |
|---|---|---|
| Shrink ratio | 4:1 Nominal | 4:1 |
| Outer layer | Semi-rigid polyolefin | Flexible polyolefin |
| Inner layer | Hot-melt adhesive | Hot-melt adhesive |
| Application focus | Automotive harness joints, branches and wear protection | General cable insulation and environmental sealing |
| درجة حرارة التشغيل | -45°C to +125°C | -45°C to +125°C |
التطبيقات
- Automotive wire-harness joints and electrical connections.
- Cable branches, wire splices and harness transition points.
- Connector and terminal protection.
- Cable repairs and moisture-sensitive wiring.
- Wiring areas requiring wear protection and environmental sealing.
معلومات الطلب
Specify HSWH-B4X, the required size from 4 / 6 / 8 / 10 / 12 / 18 mm, color and quantity when requesting a quotation from YOCL ELECTRIC. Black is the standard color, with custom colors available. All six sizes have a standard length of 1.22 m. Include the harness joint, connector or branch geometry and required protected length to support selection.