MG Nickel-Plated Brass Cable Glands
MG nickel-plated brass cable glands secure and seal cable entry points. Choose the model by thread type, cable outside diameter and mounting hole.
- Metric, PG, G (BSPP) and NPT thread options
- Nickel-plated brass parts with PA66 claws and EPDM sealing components
- IP68, 10 bar protection degree stated in the source catalogue
- Static operating range: −40 to +100 °C; dynamic: −20 to +80 °C
نظرة عامة
MG nickel-plated brass cable glands provide a sealed cable entry and secure cable retention for electrical enclosures and equipment. The series covers Metric, PG, G (BSPP) and NPT threads. Select a catalogue model by its thread designation and the outside diameter of the cable to be clamped.
The source catalogue identifies nickel-plated brass metal parts, PA66 nylon claws and EPDM rubber sealing components. It states IP68 protection at 10 bar and lists static and dynamic temperature ranges separately. Individual model dimensions are shown below; specifications for one model should not be applied to the entire series.
الميزات
- Multiple thread systems: Metric, PG, G (BSPP) and NPT models cover different threaded entries.
- Cable retention: Claw-and-seal construction grips a cable within the stated clamping range.
- Metal construction: The specified brass parts have a nickel-plated finish.
- Sealing materials: PA66 claws and EPDM rubber components are identified in the source catalogue.
المواصفات الفنية
| المعلمة | المواصفات |
|---|---|
| السلسلة | MG |
| Product type | Metal cable gland |
| Thread options | Metric, PG, G (BSPP), NPT; model dependent |
| Metal parts | Nickel-plated brass |
| Claw | PA66 nylon |
| Seal | EPDM rubber |
| Protection degree | IP68, 10 bar (source catalogue statement) |
| Static operating temperature | −40 to +100 °C; short exposure to +120 °C |
| Dynamic operating temperature | −20 to +80 °C; short exposure to +100 °C |
| Cable clamping range | Model dependent; see tables |
الأبعاد
All cable ranges below are shown as minimum–maximum outside diameter in mm. The source prints some ranges in the reverse direction. Thread O.D., mounting-hole diameter and GL are in mm; spanner size is the source’s two-value notation. A dash means the source did not give that value. G and NPT threads are not interchangeable.
Metric thread models
| Catalogue code | Thread | Cable Ø (mm) | Thread O.D. (mm) | Mounting hole (mm) | GL (mm) | Spanner (mm) |
|---|---|---|---|---|---|---|
| VO-M12A-MG | M12×1.5 | 3–5.3 | 12 | 12–12.3 | 8 | 17/17 |
| VO-M12B-MG | M12×1.5 | 4.5–7.8 | 12 | 12–12.3 | 8 | 17/17 |
| VO-M16A-MG | M16×1.5 | 4–7 | 16 | 16–16.3 | 9 | 22/22 |
| VO-M16B-MG | M16×1.5 | 6–10 | 16 | 16–16.3 | 9 | 22/22 |
| VO-M20A-MG | M20×1.5 | 5–8.8 | 20 | 20–20.3 | 9.5 | 24/24 |
| VO-M20B-MG | M20×1.5 | 7–12 | 20 | 20–20.3 | 9.5 | 24/24 |
| VO-M20C-MG | M20×1.5 | 9–14 | 20 | 20–20.3 | 9.5 | 26/26 |
| VO-M25-MG | M25×1.5 | 12–16 | 25 | 25–25.4 | 12 | 32/32 |
| VO-M32A-MG | M32×1.5 | 16–22 | 32 | 32–32.4 | 12.5 | 41/41 |
| VO-M32B-MG | M32×1.5 | 18–25 | 32 | 32–32.4 | 12.5 | 41/41 |
| VO-M40A-MG | M40×1.5 | 21–25 | 40 | 40–40.4 | 15 | 50/50 |
| VO-M40B-MG | M40×1.5 | 24–30 | 40 | 40–40.4 | 15 | 50/50 |
| VO-M50A-MG | M50×1.5 | 26–32 | 50 | 50–50.4 | 15 | 60/60 |
| VO-M50B-MG | M50×1.5 | 31–41 | 50 | 50–50.4 | 15 | 60/60 |
| VO-M63A-MG | M63×1.5 | 40–46 | 63 | 63–63.4 | 15 | 73/73 |
| VO-M63B-MG | M63×1.5 | 44–51 | 63 | 63–63.4 | 15 | 73/73 |
| VO-M75A-MG | M75×1.5 | 50–56 | 75 | 75–75.6 | 18 | 85/88 |
| VO-M75B-MG | M75×1.5 | 56–66 | 75 | 75–75.6 | 18 | 85/88 |
| VO-M90A-MG | M90×1.5 | 58–68 | 90 | 90–91 | 20 | 102/106 |
| VO-M90B-MG | M90×1.5 | 66–77 | 90 | 90–91 | 20 | 102/106 |
| VO-M100A-MG | M100×1.5 | 58–68 | 100 | 100–101 | 25 | 116/120 |
| VO-M100B-MG | M100×1.5 | 66–77 | 100 | 100–101 | 25 | 116/120 |
PG thread models
| Catalogue code | Thread | Cable Ø (mm) | Thread O.D. (mm) | Mounting hole (mm) | GL (mm) | Spanner (mm) |
|---|---|---|---|---|---|---|
| VO-PG7A-MG | PG7 | 3–5.3 | 12.5 | 12.5–12.8 | 8 | 17/17 |
| VO-PG7B-MG | PG7 | 4.5–7.8 | 12.5 | 12.5–12.8 | 8 | 17/17 |
| VO-PG9A-MG | PG9 | 3–5.8 | 15.2 | 15.2–15.5 | 8 | 18/18 |
| VO-PG9B-MG | PG9 | 4.5–7.8 | 15.2 | 15.2–15.5 | 8 | 18/18 |
| VO-PG11A-MG | PG11 | 4–7 | 18.6 | 18.6–18.9 | 9 | 22/22 |
| VO-PG11B-MG | PG11 | 6–10 | 18.6 | 18.6–18.9 | 9 | 22/22 |
| VO-PG13.5A-MG | PG13.5 | 5–8.8 | 20.4 | 20.4–20.7 | 9.5 | 24/24 |
| VO-PG13.5B-MG | PG13.5 | 7–12 | 20.4 | 20.4–20.7 | 9.5 | 24/24 |
| VO-PG16A-MG | PG16 | 7–11 | 22.5 | 22.5–22.8 | 9.5 | 26/26 |
| VO-PG16B-MG | PG16 | 9–14 | 22.5 | 22.5–22.8 | 9.5 | 26/26 |
| VO-PG21A-MG | PG21 | 12–16 | 28.3 | 28.3–28.7 | 12 | 32/32 |
| VO-PG21B-MG | PG21 | 14–18 | 28.3 | 28.3–28.7 | 12 | 32/32 |
| VO-PG29A-MG | PG29 | 16–22 | 37 | 37–37.4 | 12.5 | 41/41 |
| VO-PG29B-MG | PG29 | 18–25 | 37 | 37–37.4 | 12.5 | 41/41 |
| VO-PG36A-MG | PG36 | 21–25 | 47 | 47–47.4 | 15 | 50/50 |
| VO-PG36B-MG | PG36 | 24–30 | 47 | 47–47.4 | 15 | 50/50 |
G (BSPP) thread models
| Catalogue code | Thread | Cable Ø (mm) | Thread O.D. (mm) | Mounting hole (mm) | GL (mm) | Spanner (mm) |
|---|---|---|---|---|---|---|
| VO-G1/4A-MG | G1/4 | 3–5.3 | 13.157 | 13.2–13.4 | 8 | 17/17 |
| VO-G1/4B-MG | G1/4 | 4.5–7.8 | 13.157 | 13.2–13.4 | 8 | 17/17 |
| VO-G3/8A-MG | G3/8 | 4–7 | 16.662 | 16.7–16.9 | 9 | 22/22 |
| VO-G3/8B-MG | G3/8 | 6–10 | 16.662 | 16.7–16.9 | 9 | 22/22 |
| VO-G1/2A-MG | G1/2 | 7–11 | 20.955 | 21–21.2 | 9.5 | 26/26 |
| VO-G1/2B-MG | G1/2 | 9–14 | 20.955 | 21–21.2 | 9.5 | 26/26 |
| VO-G3/4A-MG | G3/4 | 12–16 | 26.441 | 26.5–26.8 | 12 | 32/32 |
| VO-G3/4B-MG | G3/4 | 14–18 | 26.441 | 26.5–26.8 | 12 | 32/32 |
| VO-G1A-MG | G1 | 16–22 | 33.249 | 33.3–33.6 | 12.5 | 41/41 |
| VO-G1-MG | G1 | 18–25 | 33.249 | 33.3–33.6 | 12.5 | 41/41 |
| VO-G1 1/4A-MG | G1 1/4 | 21–25 | 41.91 | 42–42.3 | 15 | 50/50 |
| VO-G1 1/4B-MG | G1 1/4 | 24–30 | 41.91 | 42–42.3 | 15 | 50/50 |
| VO-G1 1/2A-MG | G1 1/2 | 26–32 | 47.803 | 48–48.4 | 15 | 60/60 |
| VO-G1 1/2B-MG | G1 1/2 | 31–41 | 47.803 | 48–48.4 | 15 | 60/60 |
| VO-G2A-MG | G2 | 40–46 | 59.614 | 60–60.4 | 15 | 73/73 |
| VO-G2B-MG | G2 | 44–51 | 59.614 | 60–60.4 | 15 | 73/73 |
| VO-G2 1/2A-MG | G2 1/2 | 50–56 | 75.184 | 75.2–75.6 | 18 | 85/88 |
| VO-G2 1/2B-MG | G2 1/2 | 56–66 | 75.184 | 75.2–75.6 | 18 | 85/88 |
NPT thread models
The catalogue does not provide mounting-hole diameters for these NPT entries.
| Catalogue code | Thread | Cable Ø (mm) | Thread O.D. (mm) | Mounting hole (mm) | GL (mm) | Spanner (mm) |
|---|---|---|---|---|---|---|
| VO-NPT3/8A-MG | NPT3/8 | 4–7 | 17.055 | — | 13 | 22 |
| VO-NPT3/8B-MG | NPT3/8 | 6–10 | 17.055 | — | 13 | 22 |
| VO-NPT1/2A-MG | NPT1/2 | 7–11 | 21.223 | — | 13 | 26 |
| VO-NPT1/2B-MG | NPT1/2 | 9–14 | 21.223 | — | 13 | 26 |
| VO-NPT3/4A-MG | NPT3/4 | 12–16 | 26.568 | — | 14 | 32 |
| VO-NPT3/4B-MG | NPT3/4 | 14–18 | 26.568 | — | 14 | 32 |
| VO-NPT1A-MG | NPT1 | 16–22 | 33.227 | — | 15 | 41 |
| VO-NPT1B-MG | NPT1 | 18–25 | 33.227 | — | 15 | 41 |
| VO-NPT1 1/4A-MG | NPT1 1/4 | 21–25 | 41.984 | — | 15 | 50 |
| VO-NPT1 1/4B-MG | NPT1 1/4 | 24–30 | 41.984 | — | 15 | 50 |
دليل الاختيار
Check the enclosure’s thread form and size first, then match the cable outside diameter to the model’s clamping range. Compare the mounting-hole specification, GL and spanner size with the available installation space. Specify the full catalogue code and quantity when requesting a quotation. A catalogue code in this table is a selection reference within this series page; it is not a separate online SKU.
الأبعاد
