156-00915 Side-Mount Edge Clip Cable Tie

The YOCL ELECTRIC 156-00915 side-mount edge clip cable tie secures narrow cable bundles and wire harnesses along panel edges without a mounting hole.

Fits 1.0–3.0 mm panels and 1.0–30.0 mm bundles.
Inside-serrated tie: 148.0 mm long, 3.6 mm wide; 135 N minimum tensile strength.
Pre-assembled two-piece construction with a repositionable tie head.
Integrated metal retaining element for tool-free push-on edge mounting.
Black PA66HS tie / PA66HIRHS fixing body; RoHS compliant.

Inquire about this product

Overview

The YOCL ELECTRIC 156-00915 Side-Mount Edge Clip Cable Tie is a pre-assembled, two-piece fastening for securing narrow cable bundles and wire harnesses along panel edges. The clip fits 1.0–3.0 mm panel thicknesses and uses an integrated metal retaining element to engage the edge without a mounting hole, screw or adhesive fixing base.

The 148.0 mm long, 3.6 mm wide inside-serrated tie accommodates 1.0–30.0 mm bundle diameters and has a minimum tensile strength of 135 N. Its head can be repositioned after bundling to adjust the final harness routing. The black assembly combines a PA66HS tie with a PA66HIRHS fixing body.

Features

Side-mount edge fixing: provides a mounting point for routing cables along a compatible panel edge.
Compact cable tie: a 3.6 mm wide strap suits smaller cable groups within the stated bundle range.
Metal retaining element: grips the panel edge through mechanical engagement.
Repositionable tie head: allows final routing adjustments after the bundle has been secured.
Push-on installation: mounts by hand without a dedicated panel-mounting tool.
Heat-stabilized polyamide materials: PA66HS cable tie and high-impact modified PA66HIRHS fixing body.

Technical Specifications

Parameter	Specification
Brand	YOCL كهربائي
Part number	156-00915
Product type	Side-mount edge clip cable tie
Construction	Pre-assembled, two-piece assembly
Fixing method	Side-mount edge clip
Panel thickness	1.0–3.0 mm
Bundle diameter	1.0–30.0 mm
Minimum cable tie tensile strength	135 N
Cable tie material	PA66HS — heat-stabilized Polyamide 6.6
Fixing element body material	PA66HIRHS — high-impact modified, heat-stabilized Polyamide 6.6
Retaining element	Integrated metal component
Colour	Black
Serration	Inside serrated
Tie head positioning	Repositionable after bundling
Mounting hole required	No
Installation	Tool-free push-on edge mounting
RoHS	Compliant

Dimension

Dimension	Value
Cable tie length (L)	148.0 mm
Cable tie width (W)	3.6 mm
Height (H) / strap thickness	1.1 mm
Fixing height (H2)	12.5 mm
Fixing length (L2)	15.0 mm
Fixing width (W2)	13.2 mm
Compatible panel thickness	1.0–3.0 mm
Bundle diameter range	1.0–30.0 mm

Installation Notes

Select a compatible panel edge 1.0–3.0 mm thick.
Position the clip at the required location and push it onto the edge.
Check that the metal retaining element is engaged with the panel.
Wrap the cable tie around the bundle, insert the strap through the locking head and tighten it.
Reposition the tie head as required for the final routing direction.

The 135 N specification is the minimum tensile strength of the cable tie; it is not an edge-clip pull-off load or installation tension.

التطبيقات

Automotive wiring harnesses and vehicle interior cable routing.
Narrow cable groups routed along panel edges.
Wire harness assembly for transportation equipment.
Cable management in electrical equipment and industrial machinery.
Panel-building cable routing and small pipe or hose fixing.

Ordering Information

Specify 156-00915, the required quantity, panel thickness and bundle diameter when requesting a quotation. This model has a black PA66HS tie and PA66HIRHS fixing body, an integrated metal retaining element, and a 148.0 mm inside-serrated cable tie.