BZ Ball-Lock Stainless Steel Cable Ties

Self-locking stainless steel ball-lock cable ties in uncoated BZ, coated BZP and fully coated BZPM versions, with finish availability depending on width.

Listed steel grades: 201, 304 and 316.
61 width/length entries across seven widths from 4.6 to 19 mm.
Minimum tensile strength: 1,000–4,100 N, depending on width.
BZ temperature range: −80 °C to +538 °C.
BZP and BZPM temperature range: −80 °C to +150 °C.

Consultar sobre este producto

Descripción general

The YOCL ELECTRIC BZ Ball-Lock Stainless Steel Cable Ties use a self-locking ball mechanism for securing bundles. The series comprises uncoated BZ, coated BZP and fully coated BZPM versions. Available finishes depend on the width group listed below.

The supplied size table contains 61 width and length entries. Steel grades 201, 304 and 316 are listed, with width-specific tensile strength and installation tooling.

Características

Self-locking ball mechanism: Designed for straightforward band insertion and locking.
Finish selection: Uncoated, coated and fully coated versions where listed.
Coated-band protection: An additional barrier at band edges and between the metal band and bundled materials.
Width-specific strength: Minimum tensile strength increases from 1,000 N at 4.6 mm to 4,100 N at 19 mm.
Tool selection: Recommended tools are listed separately for each width group.

Especificaciones técnicas

Parámetro	Especificación
Product family	BZ ball-lock stainless steel cable ties
Locking mechanism	Self-locking ball lock
Uncoated series	BZ
Coated series	BZP
Fully coated series	BZPM
Stainless steel grades listed	201; 304; 316
Widths	4.6; 7.9; 10; 12; 12.7; 16; 19 mm
Thickness options	0.25; 0.30; 0.40 mm, depending on width
BZ operating temperature	−80 °C to +538 °C
BZP / BZPM operating temperature	−80 °C to +150 °C
Coating materials listed	Polyester; epoxy

The source does not assign each coating material or steel grade to a specific order code. Thickness values are shared options within each width group; they are not mapped to individual lengths or strength test configurations.

Dimensión

BZ Ball-Lock Stainless Steel Cable Ties dimension drawing

Width, Finish and Strength Selection

Width W (mm)	Series listed	Thickness options (mm)	Minimum tensile strength (N)	Minimum tensile strength (lbf)	Recommended tools
4.6	BZ, BZP, BZPM	0.25	1,000	225	CT02; HT-338
7.9	BZ, BZP, BZPM	0.25	2,220	500	CT02; HT-338
10	BZ, BZP, BZPM	0.25; 0.30; 0.40	3,115	700	CT02; HT-338
12	BZ, BZP, BZPM	0.25; 0.30; 0.40	3,115	700	CT02
12.7	BZ	0.30; 0.40	3,115	700	CT02
16	BZ	0.30; 0.40	3,115	700	LQB; C002
19	BZ	0.30; 0.40	4,100	920	LQB; C002

BZP and BZPM are listed for 4.6, 7.9, 10 and 12 mm widths. The supplied table lists only uncoated BZ for 12.7, 16 and 19 mm widths.

Size Table

All primary dimensions are in millimetres. Inch values are rounded conversions from the listed millimetre values. Each row is a width/length entry; the available finishes are defined by the width table above.

Size W × L (mm)	Width W (mm)	Length L (mm)	Width (inch)	Length (inch)
4.6×100	4.6	100	0.18	3.9
4.6×150	4.6	150	0.18	5.9
4.6×200	4.6	200	0.18	7.9
4.6×250	4.6	250	0.18	9.8
4.6×300	4.6	300	0.18	11.8
4.6×350	4.6	350	0.18	13.8
4.6×400	4.6	400	0.18	15.7
4.6×450	4.6	450	0.18	17.7
4.6×520	4.6	520	0.18	20.5
4.6×680	4.6	680	0.18	26.8
4.6×800	4.6	800	0.18	31.5
4.6×1000	4.6	1000	0.18	39.4
7.9×150	7.9	150	0.31	5.9
7.9×200	7.9	200	0.31	7.9
7.9×250	7.9	250	0.31	9.8
7.9×300	7.9	300	0.31	11.8
7.9×350	7.9	350	0.31	13.8
7.9×400	7.9	400	0.31	15.7
7.9×450	7.9	450	0.31	17.7
7.9×520	7.9	520	0.31	20.5
7.9×680	7.9	680	0.31	26.8
7.9×800	7.9	800	0.31	31.5
7.9×1000	7.9	1000	0.31	39.4
10×200	10	200	0.39	7.9
10×250	10	250	0.39	9.8
10×300	10	300	0.39	11.8
10×350	10	350	0.39	13.8
10×400	10	400	0.39	15.7
10×450	10	450	0.39	17.7
10×520	10	520	0.39	20.5
10×680	10	680	0.39	26.8
10×800	10	800	0.39	31.5
10×1000	10	1000	0.39	39.4
12×350	12	350	0.47	13.8
12×400	12	400	0.47	15.7
12×500	12	500	0.47	19.7
12×600	12	600	0.47	23.6
12×750	12	750	0.47	29.5
12×900	12	900	0.47	35.4
12×1100	12	1100	0.47	43.3
12.7×350	12.7	350	0.50	13.8
12.7×400	12.7	400	0.50	15.7
12.7×500	12.7	500	0.50	19.7
12.7×600	12.7	600	0.50	23.6
12.7×750	12.7	750	0.50	29.5
12.7×900	12.7	900	0.50	35.4
12.7×1100	12.7	1100	0.50	43.3
16×500	16	500	0.63	19.7
16×600	16	600	0.63	23.6
16×700	16	700	0.63	27.6
16×800	16	800	0.63	31.5
16×1100	16	1100	0.63	43.3
16×1500	16	1500	0.63	59.1
16×2000	16	2000	0.63	78.7
19×500	19	500	0.75	19.7
19×600	19	600	0.75	23.6
19×700	19	700	0.75	27.6
19×800	19	800	0.75	31.5
19×1100	19	1100	0.75	43.3
19×1500	19	1500	0.75	59.1
19×2000	19	2000	0.75	78.7

Thickness conversions: 0.25 mm ≈ 0.010 inch; 0.30 mm ≈ 0.012 inch; 0.40 mm ≈ 0.016 inch. Bundle diameter D is shown in the reference drawing but no numerical bundle range is supplied.

Finish and Temperature Selection

Serie	Finish	Supplied working temperature range
BZ	Uncoated metal	−80 °C to +538 °C
BZP	Coated band	−80 °C to +150 °C
BZPM	Fully coated	−80 °C to +150 °C

Select the finish for the required operating temperature and band-contact conditions. No antistatic test rating or electrical insulation rating is supplied for the coated versions.

Información de pedido

Specify series BZ, BZP or BZPM, actual width and length, thickness, stainless steel grade and required coating. Use the width table to check finish availability, tensile strength and recommended tool.

For 12.7, 16 and 19 mm widths, the supplied selection data covers uncoated BZ only. Specify the required working temperature and the dimensions of the actual bundle when selecting a tie length.