Connecteurs de fils à visser codés par couleur série SP

Les connecteurs de fils électriques à vis SP YOCL relient les conducteurs électriques avec des boîtiers isolés et codés par couleur à visser.

Boîtier en nylon 66 avec un élément interne en acier galvanisé à ressort.
Five models: SP1 gray, SP2 blue, SP3 orange, SP4 yellow and SP6 red.
Model-specific conductor combinations listed in mm² × conductor count.
Operating temperature -20°C to +100°C.
Twist-on connection with no crimping required.

Renseignez-vous sur ce produit

Aperçu

YOCL Électrique Connecteurs de fils à visser codés par couleur série SP join two or more electrical conductors using a twist-on connection. Each connector combines a Nylon 66 insulated housing with an internal galvanized spring-steel element.

The spring grips the prepared conductors as the connector is twisted into position. Five models use gray, blue, orange, yellow and red housings to distinguish sizes. SP connectors are suitable for general electrical wiring, building installations and electrical equipment within the specified -20°C à +100°C operating range.

Caractéristiques

Screw-on connection: Joins conductors by twisting the connector into position.
Isolation en Nylon 66 : Surrounds the internal connection with a molded insulating housing.
Acier à ressort galvanisé : Provides the internal conductor-gripping element.
Modèles codés par couleur : SP1 gray, SP2 blue, SP3 orange, SP4 yellow and SP6 red.
No crimping required: Uses a twist-on connection method.
Model-specific conductor combinations: Listed minimum and maximum combinations use mm² × conductor count.

Spécifications techniques

Paramètre	Spécification
Marque	YOCL Électrique
Série	SP
Type de produit	Screw-on / twist-on wire connector
Matière de l'isolant	Nylon 66
Internal connection element	Acier à ressort
Spring surface treatment	Galvanisé
Méthode de connexion	Screw-on / twist-on
Number of conductors	Two or more, depending on model and conductor combination
Conductor combination notation	Conductor cross-section (mm²) × conductor count
Température de fonctionnement	-20°C à +100°C
Modèles	SP1 / SP2 / SP3 / SP4 / SP6
Nombre de modèles listés	5
Crimping required	Non

Conductor Combinations

Modèle	Listed minimum combination (mm² × count)	Listed maximum combination (mm² × count)	Couleur
SP1	0.75 × 1 + 0.5 × 1	1.5 × 2	Gris
SP2	0.75 × 3	1.5 × 3	Bleu
SP3	0.75 × 3	1.5 × 3 + 1 × 1	Orange
SP4	0.25 × 1 + 0.75 × 1	2.5 × 4 + 0.75 × 1	Jaune
SP6	0.25 × 2	6 × 2 + 4 × 2	Rouge

Each term gives the conductor cross-section in mm² followed by the number of conductors. A plus sign joins groups of different conductor sizes.

Dimension

Modèle	ØB (mm)	ØC (mm)	Longueur L (mm)	Couleur
SP1	8.5	6.5	15.0	Gris
SP2	10.1	7.8	17.5	Bleu
SP3	12.8	9.6	21.7	Orange
SP4	13.8	10.7	24.0	Jaune
SP6	15.6	13.8	26.5	Rouge

All dimensions are in millimetres. ØB, ØC and L retain the dimensional symbols for this series. Colors are assigned to specific models.

Guide de sélection

Select the connector using the listed conductor cross-sections and quantities together with the model’s dimensions. For example, SP3’s listed maximum combination, 1.5 × 3 + 1 × 1, means three 1.5 mm² conductors plus one 1 mm² conductor.

Use the model-specific combinations when selecting a connector. Housing color identifies the model: gray for SP1, blue for SP2, orange for SP3, yellow for SP4 and red for SP6.

Applications

Building and lighting wiring.
Installations électriques résidentielles et commerciales.
Electrical equipment and control wiring.
Wire splicing in junction boxes.

Informations de commande

Specify the required SP model, conductor combination and quantity when making an enquiry to YOCL Electric. Housing colors are gray for SP1, blue for SP2, orange for SP3, yellow for SP4 and red for SP6.