35 × 7.5 mm Baja Bergaris DIN Rel
YOCL Electric ribbed steel DIN rail with a 35 × 7.5 mm top-hat section for equipment specified for this mounting profile.
- Ribbed steel section, 0.8 mm nominal thickness.
- Overall profile width 35 mm; depth 7.5 mm.
- Oblong mounting slots measuring 5.2 × 15 mm.
- Standard lengths: 1 m or 2 m.
- Select by section geometry, thickness, mounting slots and length.
Tinjauan
The YOCL Electric 35 × 7.5 mm Ribbed Steel DIN Rail provides a top-hat mounting section with a ribbed web for electrical equipment specified for this rail geometry. The section is 35 mm wide and 7.5 mm deep, with a nominal steel thickness of 0.8 mm.
Oblong mounting slots measure 5.2 × 15 mm. The rail is offered in 1 m and 2 m standard lengths, with the same specified section and slot dimensions for both length options.
Fitur
- Ribbed top-hat section measuring 35 × 7.5 mm.
- Steel construction with a nominal thickness of 0.8 mm.
- Oblong 5.2 × 15 mm mounting slots.
- Two standard lengths: 1 m and 2 m.
Spesifikasi Teknis
| Parameter | Spesifikasi |
|---|---|
| Merek | YOCL Listrik |
| Tipe Produk | Ribbed Steel DIN Rail |
| Bahan | Steel |
| Profil | Ribbed top-hat, 35 × 7.5 mm |
| Profile Width | 35 mm |
| Profile Depth | 7.5 mm |
| Nominal Thickness | 0.8 mm |
| Mounting Slot Shape | Oblong |
| Mounting Slot Size | 5.2 × 15 mm |
| Standard Length | 1 m or 2 m |
Dimensi
The section has a 35 mm overall width and a 7.5 mm profile depth. Each oblong mounting slot has a 5.2 × 15 mm opening.
Panduan Pemilihan
Check the equipment mounting clip requirement against the 35 × 7.5 mm top-hat section and the ribbed profile. Include the 0.8 mm nominal thickness and the 5.2 × 15 mm slot opening when comparing rail specifications.
Choose the 1 m or 2 m standard length to suit the planned rail run. Match the slot opening with the fixing arrangement on the intended mounting support, and check the available enclosure space against the equipment layout.
Informasi Pemesanan
For an enquiry, specify the 35 × 7.5 mm Ribbed Steel DIN Rail, required standard length and quantity. A complete purchase description includes steel material, the ribbed top-hat profile, 0.8 mm nominal thickness and 5.2 × 15 mm oblong slots. Include the equipment mounting section requirement where applicable.