VO-D EMC Metal Cable Glands

VO-D EMC metal cable glands are available in metric, PG, G and NPT thread families. The catalog lists 83 model codes with cable clamping and installation dimensions.

Metal body options listed: nickel-plated brass, SS304 or SS316L; PA claw and NBR seals.
Source-stated IP68 depends on the specified cable range and properly seated O-ring; no test report is supplied.
Match the thread, cable diameter, GL and joint length to the enclosure.

Tanyakan tentang produk ini

Tinjauan

VO-D EMC Metal Cable Glands provide cable entry and clamping at electrical enclosures. The supplied catalog shows 83 model codes in metric, PG, G and NPT thread families. The EMC designation comes from the source; no shielding effectiveness value is supplied.

Features

Four thread families: metric, PG, G and NPT options have separate model tables.
Cable-specific selection: the stated clamping range differs by model; the listed series covers 3–80 mm cable diameters overall.
Material options: the source lists nickel-plated brass, SS304 and SS316L bodies, PA claws and NBR sealing components, without assigning a metal option to every model code.
Catalog-stated IP68: the source conditions its claim on the specified clamping range and O-ring installation. It also prints “10 bar” without a test report or duration.

Technical Specifications

Parameter	Catalog specification
Product type	EMC metal cable gland
Series	VO-D EMC
Listed models	83
Thread families	Metric, PG, G and NPT
Cable diameter range	3–80 mm across listed models; check each model
Body material options	Nickel-plated brass, SS304 or SS316L; code mapping unspecified
Claw material	PA
Sealing components	NBR
Protection degree	IP68 stated by source; conditions and test report not supplied in full
Static temperature	−40 to +100 °C; short-term up to +120 °C
Dynamic temperature	−20 to +80 °C; short-term up to +100 °C
Dimension units	mm

The source mentions ISO 9001 and TÜV, but no product-specific certificates are supplied. It does not give EMC attenuation, installation torque or a tested chemical-resistance range.

Dimension

Cable diameter ranges below are displayed from minimum to maximum; the source prints the same endpoints in descending order. For the G and NPT families, the printed mounting-hole column is internally inconsistent with thread outside diameters, so those hole values are not published. A dash means the value requires a verified drawing.

PG Thread Models

Model	Thread	Cable diameter range (mm)	Thread OD (mm)	Mounting hole (mm)	GL (mm)	Joint length H (mm)	Spanner size (mm)
VO-D.PG7-EMC	PG7	3–6.5	12.5	12.5–12.7	7	19	14
VO-D.PG9-EMC	PG9	4–8	15.2	15.2–15.4	8	20	17
VO-D.PG11-EMC	PG11	5–10	18.6	18.6–18.8	8	21	20/21
VO-D.PG13.5-EMC	PG13.5	6–12	20.4	20.4–20.6	8	22	22
VO-D.PG16-EMC	PG16	10–14	22.5	22.5–22.7	9	23	24
VO-D.PG19-EMC	PG19	10–14	25	25–25.2	9	25	24/27
VO-D.PG21-EMC	PG21	13–18	28.3	28.3–28.5	9	27	30
VO-D.PG25-EMC	PG25	15–22	32	32–32.2	10	29	35
VO-D.PG29-EMC	PG29	18–25	37	37–37.2	10	31	40
VO-D.PG36-EMC	PG36	25–33	47	47–47.2	11	37	50
VO-D.PG42-EMC	PG42	32–38	54	54–54.2	13	38	57
VO-D.PG48-EMC	PG48	37–44	59.3	59.3–59.5	14	38	64
VO-D.PG63-EMC	PG63	42–52	72	72–72.2	15	42	78

Metric Thread Models

Model	Thread	Cable diameter range (mm)	Thread OD (mm)	Mounting hole (mm)	GL (mm)	Joint length H (mm)	Spanner size (mm)
VO-D.M12-EMC	M12×1.5	3–6.5	12	12–12.2	7	19	14
VO-D.M14-EMC	M14×1.5	4–8	14	14–14.2	7	19	17
VO-D.M16-EMC	M16×1.5	4–8	16	16–16.2	8	20	18
VO-D.M18-EMC	M18×1.5	5–10	18	18–18.2	8	21	20
VO-D.M20-EMC	M20×1.5	6–12	20	20–20.2	8	22	22
VO-D.M22-EMC	M22×1.5	10–14	22	22–22.2	8	23	24
VO-D.M24-EMC	M24×1.5	10–14	24	24–24.2	9	25	24/27
VO-D.M25A-EMC	M25×1.5	10–14	25	25–25.2	9	25	24/27
VO-D.M25B-EMC	M25×1.5	13–18	25	25–25.2	9	27	30/27
VO-D.M27A-EMC	M27×1.5	13–18	27	27–27.2	9	27	30
VO-D.M27B-EMC	M27×2	13–18	27	27–27.2	9	27	30
VO-D.M28A-EMC	M28×1.5	13–18	28	28–28.2	9	27	30
VO-D.M28B-EMC	M28×2	13–18	28	28–28.2	9	27	30
VO-D.M30A-EMC	M30×1.5	13–18	30	30–30.2	9	29	30/32
VO-D.M30B-EMC	M30×2	13–18	30	30–30.2	9	29	30/32
VO-D.M32A-EMC	M32×1.5	15–22	32	32–32.2	10	29	35
VO-D.M32B-EMC	M32×2	15–22	32	32–32.2	10	29	35
VO-D.M33A-EMC	M33×1.5	15–22	33	33–33.2	10	29	35
VO-D.M33B-EMC	M33×2	15–22	33	33–33.2	10	29	35
VO-D.M36A-EMC	M36×1.5	18–25	36	36–36.2	10	31	40
VO-D.M36B-EMC	M36×2	18–25	36	36–36.2	10	31	40
VO-D.M37A-EMC	M37×1.5	18–25	37	37–37.2	10	31	40
VO-D.M37B-EMC	M37×2	18–25	37	37–37.2	10	31	40
VO-D.M40A-EMC	M40×1.5	18–25	40	40–40.2	11	31	40/45
VO-D.M40B-EMC	M40×2	18–25	40	40–40.2	11	31	40/45
VO-D.M40C-EMC	M40×1.5	22–30	40	40–40.2	11	35	45
VO-D.M40D-EMC	M40×2	22–30	40	40–40.2	11	35	45
VO-D.M42A-EMC	M42×1.5	22–30	42	42–42.2	11	35	45
VO-D.M42B-EMC	M42×2	22–30	42	42–42.2	11	35	45
VO-D.M47A-EMC	M47×1.5	25–33	47	47–47.2	11	37	50
VO-D.M47B-EMC	M47×2	25–33	47	47–47.2	11	37	50
VO-D.M48A-EMC	M48×1.5	25–33	48	48–48.2	11	37	50/52
VO-D.M48B-EMC	M48×2	25–33	48	48–48.2	11	37	50/52
VO-D.M50A-EMC	M50×1.5	32–38	50	50–50.2	12	37	50/55
VO-D.M50B-EMC	M50×2	32–38	50	50–50.2	12	37	50/55
VO-D.M54A-EMC	M54×1.5	32–38	54	54–54.2	12	38	57
VO-D.M54B-EMC	M54×2	32–38	54	54–54.2	12	38	57
VO-D.M56A-EMC	M56×1.5	32–38	56	56–56.2	12	38	57/59
VO-D.M56B-EMC	M56×2	32–38	56	56–56.2	12	38	57/59
VO-D.M60A-EMC	M60×1.5	37–44	60	60–60.2	13	38	64
VO-D.M60B-EMC	M60×2	37–44	60	60–60.2	13	38	64
VO-D.M63A-EMC	M63×1.5	37–44	63	63–63.2	13	38	64/68
VO-D.M63B-EMC	M63×2	37–44	63	63–63.2	13	38	64/68
VO-D.M64A-EMC	M64×1.5	37–44	64	64–64.2	13	38	64/68
VO-D.M64B-EMC	M64×2	37–44	64	64–64.2	13	38	64/68
VO-D.M72-EMC	M72×2	42–52	72	72–72.2	15	42	65/68
VO-D.M75-EMC	M75×2	42–52	75	75–75.2	15	42	78
VO-D.M80-EMC	M80×2	50–62	80	80–80.2	15	45	86/88
VO-D.M88-EMC	M88×2	60–70	88	88–88.2	15	45	98
VO-D.M100-EMC	M100×2	70–80	100	100–100.2	15	45	110

G Thread Models

Model	Thread	Cable diameter range (mm)	Thread OD (mm)	Mounting hole (mm)	GL (mm)	Joint length H (mm)	Spanner size (mm)
VO-D.G1/4-EMC	G1/4	3–6.5	13.1	—	7	19	14
VO-D.G3/8-EMC	G3/8	4–8	16.6	—	8	19	18
VO-D.G1/2-EMC	G1/2	6–12	20.9	—	8	22	22
VO-D.G3/4-EMC	G3/4	13–18	26.4	—	9	25	30
VO-D.G1-EMC	G1	18–25	33.2	—	11	29	40
VO-D.G1-1/4-EMC	G1-1/4	25–33	41.9	—	13	35	50
VO-D.G1-1/2-EMC	G1-1/2	32–38	47.8	—	14	37	57
VO-D.G2-EMC	G2	37–44	59.6	—	14	38	64
VO-D.G2-1/2-EMC	G2-1/2	42–52	75.1	—	15	38	77
VO-D.G3-EMC	G3	65–70	87.8	—	15	48	94

NPT Thread Models

Model	Thread	Cable diameter range (mm)	Thread OD (mm)	Mounting hole (mm)	GL (mm)	Joint length H (mm)	Spanner size (mm)
VO-D.NPT1/4-EMC	NPT1/4	3–6.5	13.6	—	7	19	14
VO-D.NPT3/8-EMC	NPT3/8	4–8	17	—	8	19	18
VO-D.NPT1/2-EMC	NPT1/2	6–12	21.2	—	8	22	22
VO-D.NPT3/4-EMC	NPT3/4	13–18	26.5	—	9	25	30
VO-D.NPT1-EMC	NPT1	18–25	33.2	—	11	29	40
VO-D.NPT1-1/4-EMC	NPT1-1/4	25–33	41.9	—	13	35	50
VO-D.NPT1-1/2-EMC	NPT1-1/2	32–38	48	—	14	37	57
VO-D.NPT2-EMC	NPT2	37–44	60	—	14	38	64
VO-D.NPT2-1/2-EMC	NPT2-1/2	42–52	72.6	—	15	38	78
VO-D.NPT3-EMC	NPT3	65–70	88.6	—	15	45	98

Selection Guide

Specify the complete VO-D EMC model by cable outside diameter and mating thread. Verify the enclosure opening for G and NPT models against a current technical drawing. Confirm the required body metal and sealing arrangement with the supplier before ordering.

Dimension

VO-D EMC Metal Cable Glands dimension drawing