Genel Bakış
YOCL ELEKTRİKLİ 35 × 7.5 mm yuvalı çelik DIN ray, bu montaj profili için belirtilen cihazları kullanan elektrik panoları ve muhafazalar için bir TS35 üst şap rayıdır. 35 mm montaj genişliği ve 7.5 mm profil derinliği, ekipman gereksinimine karşı kontrol edilecek kesiti belirler.
Standart yuvalar, uzun yuvalar, mavi-beyaz görünüm, geleneksel bir 1.0 mm kesit veya nervürlü bir kesit arasından seçim yapın. Her yapılandırmanın kendi nominal kalınlığı, montaj yuvası boyutları ve standart uzunlukları vardır; bunlar aşağıdaki tabloda birlikte gösterilmiştir.
Özellikler
- 35 × 7.5 mm top hat profile: a defined mounting section for equipment requiring this rail geometry.
- Steel construction: nominal thickness choices are tied to the selected configuration.
- Three elongated slot patterns: 6.2 × 15 mm, 5.2 × 25 mm or 5.2 × 15 mm.
- Profile and appearance choices: a blue-white appearance option and a ribbed section are included in the series.
- Paired length selections: standard lengths follow the configuration table.
Teknik Özellikler
Boyut
The rail section is 35 mm wide and 7.5 mm deep. Slot sizes describe the width and length of each elongated opening. Select the slot dimensions and rail length from the same configuration row when specifying the panel fixing arrangement.
Seçim Kılavuzu
Start with the device manufacturer’s required rail profile. Check both the 35 mm width and 7.5 mm depth, then select a configuration with the appropriate nominal thickness and slot pattern.
For a 0.5 m standard length, use the standard-slot or long-slot row. The blue-white, conventional 1.0 mm and ribbed configurations list 1 m and 2 m lengths. Keep the configuration, thickness, slots and length together in the purchase specification.
Use the blue-white designation as an appearance choice. For the ribbed section, specify its 0.8 mm nominal thickness and 5.2 × 15 mm slots. Where fixing positions are critical, provide the panel mounting drawing with the enquiry.
Sipariş Bilgileri
Specify YOCL ELECTRIC 35 × 7.5 mm slotted steel DIN rail, configuration name, nominal thickness, slot size, standard length and quantity. Include the device mounting reference and any required fixing-hole layout so the quotation addresses the complete mechanical specification.
