BDM-17 Tek Sıkıştırmalı Zırhlı Ex d Kablo Rakoru
Tehlikeli alan kablo girişi için, tedarik edilen ürün açıklamasında bariyer tipi olarak tanımlanan, tekli sıkıştırmalı zırhlı metal kablo rakoru BDM-17.
- Pirinç, nikel kaplı pirinç, SS304 veya SS316 gövdeler.
- Su baskınına karşı koruma; belirtilen IP66 ve IP68 (1 m, 1 h).
- Ex d, Ex e ve Ex t için Metrik ve NPT; yalnızca Ex e ve Ex t için G diş.
- Ayrı kılıf ve zırh yönlendirme verileriyle 15 boyutları.
- NPT versiyonları hariç standart olarak Naylon rondela ve kilit somunu.
Genel Bakış
YOCL ELECTRIC BDM-17 Tekli Sıkıştırmalı Zırhlı Ex d Kablo Rakoru, denizcilik uygulamaları dahil olmak üzere neme maruz kalan endüstriyel ortamlar için su baskınına karşı korumalı zırhlı kablo girişi sağlar. Tedarik edilen ürün açıklaması, bunu bir bariyer tipi kablo rakuru olarak tanımlamaktadır.
It is listed for steel wire armor, steel tape armor, braid armor and marine braided cable constructions. Lead-sheathed cable applications are described with an earth tag and earth plug. Thread selection determines which Ex applications are listed: metric and NPT threads for Ex d, Ex e and Ex t; G threads for Ex e and Ex t only.
Özellikler
- Single compression construction: Armored metal cable gland with model-specific sheath and armor data.
- Deluge ingress protection: Designed for environments exposed to moisture and water spray.
- Tooth-shaped clamping cap: Provides a grip surface for handling during assembly.
- Body material options: Brass, nickel-plated brass, SS304 and SS316.
- Cable compatibility: Listed armored and lead-sheathed cable constructions, subject to size and accessory selection.
Teknik Özellikler
| Parametre | Teknik Özellikler |
|---|---|
| Model | BDM-17 |
| Type | Single compression armored metal type; identified as barrier type in the supplied description |
| Body material options | Brass; nickel-plated brass; SS304; SS316 |
| Sealing material options | Silicone rubber; neoprene; PTFE (Teflon); PA6 |
| Operating temperature options | −20 °C to +60 °C / −60 °C to +80 °C, depending on configuration |
| Supplied Ex marking | Ex db IIC Gb; Ex eb IIC Gb; Ex tb IIIC Db, subject to thread configuration |
| Application designation | II 2GD, as stated in the supplied specification |
| Ingress protection | IP66; IP68 (1 m, 1 h) |
| Metric and NPT thread applications | Ex d; Ex e; Ex t |
| BSP (G) thread applications | Ex e; Ex t only |
| Approvals stated in supplied specification | IECEx; ATEX; EAC (CUTR); CNEx |
| Standards listed in supplied specification | IEC/EN 60079-0; IEC/EN 60079-1; IEC/EN 60079-31; IEC/EN 60529 |
| Standard accessories | Nylon washer and locknut, except for NPT versions |
| Optional accessories | Earth tag; PVC shroud; serrated washer; red fibre washer; A/B putty compound |
| Lead-sheathed cable accessory condition | Earth tag and earth plug, as stated in the supplied description |
The temperature options are configuration-dependent. The supplied data does not map each option to a sealing material and does not provide certificate numbers. The G-thread option is not listed for Ex d use.
Boyut
Sheath and Armor Data
Dimensions are in millimetres, except the NPT/G nominal thread sizes in inches. The strict less-than limits for A and the slash-separated armor values are retained from the supplied table.
| Size | Metric entry thread AG | NPT/G nominal size (inch) | Inner sheath A (mm) | Outer sheath B (mm) | Armor orientation 1 (mm) | Armor orientation 2 (mm) |
|---|---|---|---|---|---|---|
| 20A | M20×1.5 | 1/2 | <11 | 5.5–12 | 0.9/1.25 | 0/0.7 |
| 20B | M20×1.5 | 1/2 | <11 | 9.5–16 | 0.9/1.25 | 0/0.7 |
| 20C | M20×1.5 | 1/2 | <15 | 12.5–20.5 | 0.9/1.25 | 0/0.7 |
| 25B | M25×1.5 | 3/4 | <15 | 12.5–20.5 | 0.9/1.25 | 0/0.7 |
| 25C | M25×1.5 | 3/4 | <21 | 17–26 | 1.25/1.6 | 0/0.7 |
| 32B | M32×1.5 | 1 | <21 | 17–26 | 1.25/1.6 | 0/0.7 |
| 32C | M32×1.5 | 1 | <27 | 22–33 | 1.6/2 | 0/0.7 |
| 40B | M40×1.5 | 1-1/4 | <27 | 22–33 | 1.6/2 | 0/0.7 |
| 40C | M40×1.5 | 1-1/4 | <33 | 28–41 | 1.8/2.5 | 0/0.7 |
| 50B | M50×1.5 | 1-1/2 | <33 | 28–41 | 1.8/2.5 | 0/1.0 |
| 50C | M50×1.5 | 1-1/2 | <43 | 36–52.6 | 1.8/2.5 | 0/1.0 |
| 63B | M63×1.5 | 2 | <43 | 36–52.6 | 1.8/2.5 | 0/1.0 |
| 63C | M63×1.5 | 2 | <54.5 | 46–65 | 1.8/2.5 | 0/1.0 |
| 75B | M75×1.5 | 2-1/2 | <54.5 | 46–65 | 1.8/2.5 | 0/1.0 |
| 75C | M75×1.5 | 2-1/2 | <66 | 57–78 | 1.8/2.5 | 0/1.0 |
The armor values are listed by orientation; slash-separated entries are not rewritten as continuous min–max ranges. Select the compatible armor-ring orientation for the actual cable construction. The NPT/G column gives a nominal size; the actual thread standard and permitted Ex application must be specified separately.
Length Data
| Size | Body length L1 (mm) | Entry thread length L (mm) |
|---|---|---|
| 20A | 70 | 16 |
| 20B | 70 | 16 |
| 20C | 81 | 16 |
| 25B | 81 | 16 |
| 25C | 91 | 16 |
| 32B | 91 | 18 |
| 32C | 96 | 18 |
| 40B | 96 | 18 |
| 40C | 107 | 18 |
| 50B | 107 | 18 |
| 50C | 132 | 18 |
| 63B | 132 | 20 |
| 63C | 145 | 20 |
| 75B | 145 | 20 |
| 75C | 154 | 20 |
L1 and L follow the source drawing: L1 is the body length beyond the entry thread and L is the entry thread length. No maximum external diameter D is supplied for this model.
Aksesuarlar ve Sipariş
Specify BDM-17 size, body material, actual thread standard and size, inner and outer sheath diameters, armor construction and required ring orientation. Include the required Ex application and operating temperature configuration.
For lead-sheathed cables, specify the earth tag and earth plug described for that application. Nylon washers and locknuts are standard except for NPT versions. PVC shrouds, serrated washers, red fibre washers and A/B putty compound are listed as optional accessories.
For a barrier configuration, specify the compatible compound system and its supply with the order. The supplied data does not define the compound formulation, curing procedure or installation torque; use the documentation for the delivered configuration.