156-00896 Side-Mount Edge Clip Cable Tie

The YOCL Electric 156-00896 Side-Mount Edge Clip Cable Tie secures harnesses to 1.0–3.0 mm panel edges using a pre-assembled two-piece fixing with an integrated metal retaining element.

Bundle diameter: Ø4.0–45.0 mm; strap: 200.0 × 4.6 × 1.2 mm.
Inside serrated, non-releasable tie with 225 N minimum tensile strength.
Push-on edge mounting without a fixing hole, screw or adhesive base.
Cable tie head can be repositioned after bundling.
Black PA66HS tie and PA66HIRHS fixing; operating temperature: −40°C to +105°C.

Inquire about this product

156-00896 Side-Mount Edge Clip Cable Tie

Overview

The YOCL Electric 156-00896 is a pre-assembled two-piece cable tie and edge clip for routing wire harnesses, cables, pipes and hoses along panel edges. The fixing pushes directly onto edges 1.0–3.0 mm thick, with an integrated metal retaining element providing mechanical engagement.

The 200.0 mm inside serrated strap accommodates bundles from Ø4.0 to 45.0 mm. Its two-piece construction allows the cable tie head to be repositioned after bundling for final harness alignment.

Features

Side-mount configuration supports routing along or adjacent to the panel edge.
Direct edge fixing requires no mounting hole, screw or adhesive base.
Pre-assembled components simplify manual push-on installation.
Repositioning the tie head helps align the secured bundle during final assembly.
The non-releasable tie has a minimum tensile strength of 225 N.

Technical Specifications

Specification	Value
Brand	YOCL Điện
Part number	156-00896
Product type	Side-mount edge clip cable tie
Construction	Pre-assembled, two-piece
Fixing method	Push-on panel edge clip
Panel thickness	1.0–3.0 mm
Bundle diameter	Ø4.0–45.0 mm
Minimum tie tensile strength	225 N
Cable tie material	PA66HS, heat stabilized polyamide 6.6
Fixing element material	PA66HIRHS, high impact modified, heat stabilized polyamide 6.6
Retaining element	Integrated metal element
Color	Black
Serration	Inside serrated
Releasable	No
Operating temperature	−40°C to +105°C
Material flammability	UL 94 HB
RoHS	Compliant

Dimensions

Dimension	Value
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Cable tie thickness / height (T / H)	1.2 mm
Fixing height (H2)	15.5 mm
Fixing length (L2)	14.0 mm
Fixing width (W2)	12.0 mm

Ứng dụng

Automotive wire harnesses and vehicle electrical assemblies.
Cable routing along panel edges without dedicated fixing holes.
Industrial machinery, electrical equipment and panel assemblies.
Pipe and hose routing on compatible panel edges.

Installation and Ordering

Select a suitable panel edge within the 1.0–3.0 mm thickness range.
Push the clip onto the edge at the required location and check engagement of the retaining element.
Wrap the tie around the bundle, feed the strap through the locking head and tighten to secure it.
Reposition the cable tie head as needed for routing, then check clip retention and bundle security.

No dedicated panel-mounting tool is required. Order by part number 156-00896 for the black PA66HS cable tie with PA66HIRHS fixing. Confirm panel thickness, bundle diameter and fixing clearance before selecting for an assembly.