DT-Z Series Small Head Copper Connecting Terminal
YOCL ELECTRIC DT-Z Series Small Head Copper Connecting Terminal is designed for copper-conductor connections where the equipment connection space is limited. The nine models, DT-Z-25 through DT-Z-240, share an 8.5 mm mounting hole and 16 mm palm width in the supplied table.
- Small connection palm for restricted installation space.
- Tubular copper conductor barrel and mounting-hole palm.
- Complete Φ, D, d, L, L1 and B dimensions for all nine models.
Tổng quan
YOCL ELECTRIC DT-Z Series Small Head Copper Connecting Terminal connects a copper conductor to compatible electrical equipment. Its small connection palm is suited to restricted installation space, while the tubular barrel accepts the conductor for crimping. The series contains nine models, DT-Z-25 through DT-Z-240.
Tính năng
- Small connection palm: intended for equipment connections with limited space.
- Copper construction: designed for copper-conductor connections.
- Tubular barrel: accepts a conductor for a crimped connection.
- Consistent palm dimensions: the supplied table lists Φ = 8.5 mm and B = 16 mm for every model.
- Model-specific barrel sizing: D, d, L and L1 vary by model.
Thông số kỹ thuật
| Tham số | Thông số kỹ thuật |
|---|---|
| Series | DT-Z |
| Product type | Small head copper connecting terminal |
| Conductor material | Copper |
| Conductor connection | Crimped tubular barrel |
| Equipment connection | Mounting-hole palm |
| Listed models | 9 |
| Dimensional units | mm |
Kích thước
All dimensions are in millimeters. Φ is the palm mounting-hole diameter, D is the barrel outside diameter, d is its bore diameter, L is the overall length, L1 is the barrel-side length and B is the palm width.
| Mẫu | Φ (mm) | D (mm) | d (mm) | L (mm) | L1 (mm) | B (mm) |
|---|---|---|---|---|---|---|
| DT-Z-25 | 8.5 | 11 | 7.6 | 76 | 34 | 16 |
| DT-Z-35 | 8.5 | 12 | 8.7 | 77 | 34 | 16 |
| DT-Z-50 | 8.5 | 13 | 10 | 80 | 35 | 16 |
| DT-Z-70 | 8.5 | 15 | 12 | 85 | 41 | 16 |
| DT-Z-95 | 8.5 | 17 | 13.5 | 90 | 44 | 16 |
| DT-Z-120 | 8.5 | 19 | 15.5 | 95 | 50 | 16 |
| DT-Z-150 | 8.5 | 21 | 16.5 | 100 | 52 | 16 |
| DT-Z-185 | 8.5 | 23 | 18.5 | 115 | 55 | 16 |
| DT-Z-240 | 8.5 | 26 | 21 | 120 | 60 | 16 |
Hướng dẫn lựa chọn
Select the DT-Z model whose barrel bore d is suitable for the conductor. Check the 8.5 mm mounting hole and 16 mm palm width against the equipment connection, then compare D, L and L1 with the available installation space. Use a crimping method suitable for the selected conductor and terminal.
Ứng dụng
Copper-conductor connections to equipment terminals in compact power distribution and electrical assemblies.
Thông tin đặt hàng
Specify the DT-Z model and quantity when requesting a quotation.