156-00575 ربطة كابل للتثبيت بالحافة، مسننة من الخارج

The YOCL ELECTRIC 156-00575 Edge-Mount Cable Tie secures cable and wire-harness bundles directly to panel edges with a pre-assembled two-piece fixing and integrated metal clamp. Its outside-serrated strap provides a smooth inner contact surface, and the tie head can be repositioned after bundling for final harness alignment.

Fits 1.0–3.0 mm panel edges without a mounting hole.
Accommodates Ø1.0–45.0 mm bundles; tie dimensions 200.0 × 4.6 × 1.3 mm.
225 N minimum cable tie tensile strength and non-releasable closure.
Black PA66HS cable tie with PA66HIRHS fixing element and metal retaining clamp.
Tool-free push-on panel mounting; operating temperature −40°C to +105°C and UL 94 HB flammability classification.

استفسر عن هذا المنتج

نظرة عامة

The YOCL ELECTRIC 156-00575 Edge-Mount Cable Tie, Outside Serrated, combines a cable tie with a panel-edge fixing in a pre-assembled two-piece assembly. The side-mount fixing pushes onto panel edges from 1.0 to 3.0 mm thick, where an integrated metal clamp provides mechanical retention. Installation requires no mounting hole, separate screw or adhesive mounting base.

The 200.0 mm cable tie accommodates bundle diameters from 1.0 to 45.0 mm. Its serrations face outward, providing a smooth inner surface around the cable bundle. The tie head can be repositioned after bundling to adjust final wire-harness alignment.

الميزات

Panel-edge fixing: Fits 1.0–3.0 mm panel edges with a push-on side-mount configuration.
Integrated metal clamp: Grips the panel edge and helps maintain the fixing position after installation.
Outside-serrated strap: Keeps the serrations away from the cable-contact surface.
Pre-assembled two-piece construction: Allows tie-head repositioning after bundling.
Heat-stabilized materials: Uses PA66HS for the tie and PA66HIRHS for the fixing element.
225 N minimum tie tensile strength: Provides the stated cable tie strength for bundle retention.

المواصفات الفنية

المواصفات	Value
العلامة التجارية	YOCL كهربائي
رقم القطعة	156-00575
نوع المنتج	Cable tie with edge fixing element
الإنشاء	مُجمَّع مسبقًا، من قطعتين
طريقة التثبيت	Push-on edge mount
Mounting position	Panel edge / side mount
سمك اللوحة	1.0–3.0 mm
Mounting hole required	No
قطر الحزمة	Ø1.0–45.0 mm
Cable tie length (L)	200.0 mm
Cable tie width (W)	4.6 mm
Cable tie thickness / height (H)	1.3 mm
Fixing height (H2)	13.4 mm
Fixing length (L2)	15.0 mm
Fixing width (W2)	11.8 mm
Minimum cable tie tensile strength	225 N
مادة رباط الكابل	PA66HS — بولي أميد مثبت بالحرارة 6.6
مادة عنصر التثبيت	PA66HIRHS — high-impact modified, heat-stabilized polyamide 6.6
Retaining element	Integrated metal clamp
اللون	أسود
Serration	Outside serrated
Releasable	No
Tie head position	Repositionable after bundling
درجة حرارة التشغيل	−40°C to +105°C
Fixing element operating temperature	−40°C to +105°C
Flammability	UL 94 HB
Panel installation	Push-on; no separate mounting tool required

ملاحظات التركيب

Verify the panel edge is 1.0–3.0 mm thick and select the mounting position.
Check clearance around adjacent components against fixing dimensions H2 13.4 mm, L2 15.0 mm and W2 11.8 mm.
Align the edge fixing with the panel and push it on by hand until the metal clamp engages securely.
Position a cable or wire-harness bundle within the 1.0–45.0 mm range, wrap the tie around it and tighten to suit the cables and installation requirements.
Reposition the tie head if needed, then check that the fixing and bundle are securely retained.

The closure is non-releasable. The 225 N rating is cable tie tensile strength; assess panel-edge retention and installation tension separately for the application.

التطبيقات

Suitable applications include automotive wire harnesses, vehicle electrical systems, panel-edge cable routing, wire-harness manufacturing and industrial electrical equipment. Select the fixing according to the panel thickness, bundle diameter, installation clearance and operating temperature.

معلومات الطلب

Specify YOCL ELECTRIC 156-00575, black, with an outside-serrated PA66HS cable tie, PA66HIRHS edge fixing and integrated metal clamp. For selection or quotation, provide the panel-edge thickness, bundle diameter and required quantity.