35 × 7.5 mm Riel de aluminio ranurado DIN
YOCL Carril 35 × 7.5 mm de aluminio ranurado DIN con perfil de TS35 sombrero y opciones de grosor y ranura emparejadas.
- Ranuras 4.2 × 12 mm: 0.7, 0.9 o 1.1 mm de grosor.
- Ranuras 4.8 × 25 mm: 1.1 mm de grosor.
- Longitudes estándar: 1 m o 2 m para cada configuración.
- Select the rail thickness, slot size and length together.
Descripción general
The YOCL Electric 35 × 7.5 mm Slotted Aluminium DIN Rail provides a top hat mounting profile for electrical equipment specified for TS35 rail. Aluminium (aluminum) construction, a 35 mm profile width and a 7.5 mm profile depth identify this product family. Standard rail lengths are 1 m and 2 m.
Two mounting-slot designs are available. The 4.2 × 12 mm slot design has thickness choices of 0.7, 0.9 and 1.1 mm. The 4.8 × 25 mm slot design has a thickness of 1.1 mm. Each thickness is paired with its specified slot opening in the configuration table below.
Características
- 35 × 7.5 mm top hat profile for TS35 mounting requirements.
- Aluminium construction with clearly specified thickness options.
- Elongated mounting slots in two opening sizes.
- Four defined thickness-and-slot configurations, each offered in 1 m or 2 m lengths.
Especificaciones técnicas
| Parámetro | Especificación |
|---|---|
| Marca | YOCL Eléctrico |
| Tipo de producto | Slotted aluminium DIN rail |
| Perfil | Top hat, TS35 |
| Material | Aluminio |
| Ancho de perfil | 35 mm |
| Profile depth | 7.5 mm |
| Forma del orificio de montaje | Elongated slot |
| Standard lengths | 1 m / 2 m |
Available Configurations
| Rail thickness | Mounting slot width × length | Standard lengths |
|---|---|---|
| 0.7 mm | 4.2 × 12 mm | 1 m / 2 m |
| 0.9 mm | 4.2 × 12 mm | 1 m / 2 m |
| 1.1 mm | 4.2 × 12 mm | 1 m / 2 m |
| 1.1 mm | 4.8 × 25 mm | 1 m / 2 m |
Dimensión
The profile width × depth is 35 × 7.5 mm. Slot dimensions describe the opening width and length. Use the configuration table to identify the matching rail thickness and slot size.
Guía de selección
Start with the equipment mounting requirement and confirm that it calls for a 35 × 7.5 mm top hat profile. Keep the material requirement explicit when comparing rails of the same section size.
Select the thickness and slot size together. At 1.1 mm thickness, both slot designs are available, so thickness alone does not identify the required configuration. Compare the slot opening with the planned fixing arrangement and include any required hole-layout drawing with the enquiry.
Choose the 1 m or 2 m standard length according to the rail runs and quantities in the panel layout. Keep length separate from profile width, depth and thickness when preparing the purchase description.
Información de pedido
Specify the 35 × 7.5 mm aluminium DIN rail, the thickness-and-slot pairing, required standard length and quantity. For example, an enquiry can request 1.1 mm thickness with 4.2 × 12 mm slots in 2 m lengths. Include equipment mounting references and project-specific material or finish requirements where applicable.