35 × 7.5 mm Ray nhôm có rãnh DIN
YOCL Electric 35 × 7.5 mm slotted aluminium DIN rail with a top hat TS35 profile and paired thickness-and-slot options.
- 4.2 × 12 mm slots: 0.7, 0.9 or 1.1 mm thickness.
- 4.8 × 25 mm slots: 1.1 mm thickness.
- Standard lengths: 1 m or 2 m for each configuration.
- Select the rail thickness, slot size and length together.
Tổng quan
The YOCL Electric 35 × 7.5 mm Slotted Aluminium DIN Rail provides a top hat mounting profile for electrical equipment specified for TS35 rail. Aluminium (aluminum) construction, a 35 mm profile width and a 7.5 mm profile depth identify this product family. Standard rail lengths are 1 m and 2 m.
Two mounting-slot designs are available. The 4.2 × 12 mm slot design has thickness choices of 0.7, 0.9 and 1.1 mm. The 4.8 × 25 mm slot design has a thickness of 1.1 mm. Each thickness is paired with its specified slot opening in the configuration table below.
Tính năng
- 35 × 7.5 mm top hat profile for TS35 mounting requirements.
- Aluminium construction with clearly specified thickness options.
- Elongated mounting slots in two opening sizes.
- Four defined thickness-and-slot configurations, each offered in 1 m or 2 m lengths.
Thông số kỹ thuật
| Tham số | Thông số kỹ thuật |
|---|---|
| Thương hiệu | YOCL Điện |
| Loại sản phẩm | Slotted aluminium DIN rail |
| Kiểu dáng | Top hat, TS35 |
| Chất liệu | Nhôm |
| Profile width | 35 mm |
| Profile depth | 7.5 mm |
| Mounting hole shape | Elongated slot |
| Standard lengths | 1 m / 2 m |
Available Configurations
| Rail thickness | Mounting slot width × length | Standard lengths |
|---|---|---|
| 0.7 mm | 4.2 × 12 mm | 1 m / 2 m |
| 0.9 mm | 4.2 × 12 mm | 1 m / 2 m |
| 1.1 mm | 4.2 × 12 mm | 1 m / 2 m |
| 1.1 mm | 4.8 × 25 mm | 1 m / 2 m |
Kích thước
The profile width × depth is 35 × 7.5 mm. Slot dimensions describe the opening width and length. Use the configuration table to identify the matching rail thickness and slot size.
Hướng dẫn lựa chọn
Start with the equipment mounting requirement and confirm that it calls for a 35 × 7.5 mm top hat profile. Keep the material requirement explicit when comparing rails of the same section size.
Select the thickness and slot size together. At 1.1 mm thickness, both slot designs are available, so thickness alone does not identify the required configuration. Compare the slot opening with the planned fixing arrangement and include any required hole-layout drawing with the enquiry.
Choose the 1 m or 2 m standard length according to the rail runs and quantities in the panel layout. Keep length separate from profile width, depth and thickness when preparing the purchase description.
Thông tin đặt hàng
Specify the 35 × 7.5 mm aluminium DIN rail, the thickness-and-slot pairing, required standard length and quantity. For example, an enquiry can request 1.1 mm thickness with 4.2 × 12 mm slots in 2 m lengths. Include equipment mounting references and project-specific material or finish requirements where applicable.