15 × 5.5 mm Rel Baja Mini DIN
YOCL Electric mini steel DIN rail with a compact 15 × 5.5 mm top hat TS15 profile for equipment requiring this mounting section.
- Steel construction with 0.9 mm nominal thickness.
- Oblong mounting slots: 4.2 × 12 mm.
- Panjang standar: 1 m atau 2 m.
- Select by equipment profile requirement, rail length and fixing arrangement.
Tinjauan
The YOCL Electric 15 × 5.5 mm Mini Steel DIN Rail provides a compact top hat mounting section for electrical equipment specified for TS15 rail. Its profile is 15 mm wide and 5.5 mm deep, with a nominal steel thickness of 0.9 mm. These dimensions identify the rail section to compare with the equipment mounting requirement.
The rail has oblong 4.2 × 12 mm mounting slots and is offered in standard lengths of 1 m and 2 m. Both lengths use the same profile, material, thickness and slot opening specified below.
Fitur
- Compact 15 × 5.5 mm top hat profile with TS15 identification.
- Steel construction with a nominal thickness of 0.9 mm.
- Oblong mounting slots measuring 4.2 × 12 mm.
- Standard lengths of 1 m and 2 m for panel rail runs.
Spesifikasi Teknis
| Parameter | Spesifikasi |
|---|---|
| Merek | YOCL Listrik |
| Jenis produk | Mini steel DIN rail |
| Bahan | Baja |
| Profil | Top hat, TS15 |
| Lebar profil | 15 mm |
| Kedalaman profil | 5.5 mm |
| Ketebalan nominal | 0.9 mm |
| Mounting hole shape | Oblong slot |
| Mounting slot size | 4.2 × 12 mm |
| Standard lengths | 1 m / 2 m |
Dimensi
The section width × depth is 15 × 5.5 mm. Mounting slots have a 4.2 mm opening width and a 12 mm opening length. The standard rail lengths correspond to 1,000 mm and 2,000 mm.
Panduan Pemilihan
Check the equipment mounting specification for the required TS15 top hat section. Compare the 15 mm width and 5.5 mm depth with the device mounting clip and relevant equipment drawing. Keep the steel material and 0.9 mm nominal thickness in the purchase specification to identify this configuration completely.
Select the 1 m or 2 m length from the intended rail runs and quantities in the panel layout. Check available enclosure space and the planned fixing arrangement before choosing the length. The slot dimensions describe the opening; a particular hole spacing or full hole layout should be addressed through the project drawing.
Informasi Pemesanan
For a quotation, state the 15 × 5.5 mm mini steel DIN rail, required standard length and quantity. Include the equipment mounting reference and enclosure layout where the project requires a fit check.
Provide any project-specific material or surface-finish requirements with the enquiry.