15 × 5.5 mm Ray DIN Mini Thép
YOCL Electric mini steel DIN rail with a compact 15 × 5.5 mm top hat TS15 profile for equipment requiring this mounting section.
- Steel construction with 0.9 mm nominal thickness.
- Oblong mounting slots: 4.2 × 12 mm.
- Standard lengths: 1 m or 2 m.
- Select by equipment profile requirement, rail length and fixing arrangement.
Tổng quan
The YOCL Electric 15 × 5.5 mm Mini Steel DIN Rail provides a compact top hat mounting section for electrical equipment specified for TS15 rail. Its profile is 15 mm wide and 5.5 mm deep, with a nominal steel thickness of 0.9 mm. These dimensions identify the rail section to compare with the equipment mounting requirement.
The rail has oblong 4.2 × 12 mm mounting slots and is offered in standard lengths of 1 m and 2 m. Both lengths use the same profile, material, thickness and slot opening specified below.
Tính năng
- Compact 15 × 5.5 mm top hat profile with TS15 identification.
- Steel construction with a nominal thickness of 0.9 mm.
- Oblong mounting slots measuring 4.2 × 12 mm.
- Standard lengths of 1 m and 2 m for panel rail runs.
Thông số kỹ thuật
| Tham số | Thông số kỹ thuật |
|---|---|
| Thương hiệu | YOCL Điện |
| Loại sản phẩm | Mini steel DIN rail |
| Chất liệu | Steel |
| Kiểu dáng | Top hat, TS15 |
| Profile width | 15 mm |
| Profile depth | 5.5 mm |
| Độ dày danh nghĩa | 0.9 mm |
| Mounting hole shape | Oblong slot |
| Mounting slot size | 4.2 × 12 mm |
| Standard lengths | 1 m / 2 m |
Kích thước
The section width × depth is 15 × 5.5 mm. Mounting slots have a 4.2 mm opening width and a 12 mm opening length. The standard rail lengths correspond to 1,000 mm and 2,000 mm.
Hướng dẫn lựa chọn
Check the equipment mounting specification for the required TS15 top hat section. Compare the 15 mm width and 5.5 mm depth with the device mounting clip and relevant equipment drawing. Keep the steel material and 0.9 mm nominal thickness in the purchase specification to identify this configuration completely.
Select the 1 m or 2 m length from the intended rail runs and quantities in the panel layout. Check available enclosure space and the planned fixing arrangement before choosing the length. The slot dimensions describe the opening; a particular hole spacing or full hole layout should be addressed through the project drawing.
Thông tin đặt hàng
For a quotation, state the 15 × 5.5 mm mini steel DIN rail, required standard length and quantity. Include the equipment mounting reference and enclosure layout where the project requires a fit check.
Provide any project-specific material or surface-finish requirements with the enquiry.