Profile & depth
Check the equipment drawing for TS35 35 × 7.5 mm, TS35 35 × 15 mm, G32 or TS15. Confirm the complete cross-section and space needed to install and release the device.
Ray DIN
Nhà sản xuất
DIN rails for electrical panels and control cabinets. Compare 35 mm top hat, 32 mm G-profile and 15 mm mini rails in steel and aluminium, then specify the section, mounting slots and length that match your equipment.
DIN Rails series
Mở toàn bộ danh mụcCompare DIN rail profiles and configurations
| Cấu tạo | Tiêu chí lựa chọn | Tham chiếu dòng |
|---|---|---|
| 35 × 7.5 mm · Slotted steel | Standard and long-slot configurations offer 0.9, 1.0 or 1.2 mm thickness and 0.5, 1 or 2 m lengths. Slot sizes are 6.2 × 15 or 5.2 × 25 mm respectively. The series also includes blue-white, conventional and ribbed configurations; select a complete specification row. | TS35 · configuration-dependent |
| 35 × 7.5 mm · Ribbed steel | 0.8 mm nominal thickness with 5.2 × 15 mm oblong slots. Standard lengths are 1 m and 2 m. Match the ribbed section to the equipment mounting requirement. | TS35 · ribbed section |
| 35 × 7.5 mm · Blue-white steel | 1.0 mm nominal thickness, 6.2 × 15 mm slots and 1 m or 2 m lengths. Blue-white describes appearance; confirm the required surface treatment separately. | TS35 · blue-white appearance |
| 35 × 15 mm · Slotted steel | 15 mm profile depth, 1.5 mm nominal thickness and 6.2 × 15 mm slots. Standard lengths are 1 m and 2 m. Check the deeper section against device clearance and mounting-foot requirements. | TS35 · 15 mm depth |
| 35 × 7.5 mm · Slotted aluminium | 4.2 × 12 mm slots pair with 0.7, 0.9 or 1.1 mm thickness. The 4.8 × 25 mm long-slot configuration uses 1.1 mm thickness. Both configurations list 1 m and 2 m lengths. | TS35 · aluminium / aluminum |
| 32 mm · Steel G-profile | Asymmetric 15/9 mm flange projections, 1.2 mm thickness and 6.2 × 15 mm slots. Standard lengths are 1 m and 2 m. Requires a matching G-profile mounting foot. | G32 / TS32 · steel |
| 32 mm · Aluminium G-profile | Asymmetric 15/9 mm flange projections, 1.2 mm thickness and 6.2 × 15 mm slots. The published standard length is 1 m, unlike the steel version. | G32 / TS32 · aluminium |
| 15 × 5.5 mm · Mini steel | Compact top hat profile with 0.9 mm thickness and 4.2 × 12 mm slots. Standard lengths are 1 m and 2 m. Select only for devices specified for this smaller mounting section. | TS15 · mini rail |
Start with the mounting foot.
A rail width alone does not establish compatibility. Keep profile, material, thickness and fixing details together when comparing options.
Vật liệu & hoàn thiện
Specify steel or aluminium, nominal thickness and required finish. Request project-specific corrosion or material documentation where needed; appearance is not proof of a coating specification.
Slots & fixings
Match slot width and length to the mounting arrangement. Slot size does not establish hole pitch. Supply the fixing drawing, fastener requirements and support spacing for review.
Length & panel layout
Choose a listed standard length for the selected configuration. Account for end stops, wiring access and enclosure clearances. Send cut-length or hole-layout requests for feasibility review.
Send your din rails
yêu cầu.
Send the rail profile, material, thickness, slot dimensions, length and quantities, plus the device mounting reference and panel drawing.
Chuẩn bị yêu cầu báo giáSpecify the complete rail, not just “35 mm”.
Thống nhất thông số kỹ thuật và bằng chứng cần thiết trước khi đặt hàng.
Khám phá sản xuấtSection schedule
List each rail profile, material, nominal thickness and quantity. Identify ribbed, blue-white or other configuration-specific requirements.
Fixing layout
Provide slot dimensions, required hole pattern, panel fixing positions and support layout. Distinguish slot opening size from spacing.
Length & preparation
Specify standard length or requested cut length, quantity per length and any edge or end-preparation requirements. Confirm non-standard work in the quotation.
Documentation & packing
State required drawings, material or finish documentation, labels, bundle quantities and destination. Agree sample acceptance criteria before ordering.
OEM & ĐÓNG GÓI
Thông số kỹ thuật của bạn.
Kế hoạch đóng gói của bạn.
Build your din rails order around the selected models, identification and supply requirements.
Lịch trình mẫu
List each rail profile, material, nominal thickness and quantity. Identify ribbed, blue-white or other configuration-specific requirements.
Nhãn & nhận dạng
Cung cấp mã bộ phận, tác phẩm nghệ thuật nhãn và bất kỳ thông tin lô hoặc truy xuất nguồn gốc nào cần thiết cho đơn hàng.
Số lượng đóng gói
Chỉ định số lượng cho mỗi mẫu, gói riêng lẻ, thùng carton ngoài và điểm đến giao hàng.
Ray DIN
câu hỏi mua hàng.
What is DIN rail used for?
DIN rail provides a mounting interface for compatible electrical devices in panels and cabinets. Select the rail using the device mounting-foot specification, the panel layout and the complete rail section.
What is the difference between 35 × 7.5 mm and 35 × 15 mm DIN rail?
Both listed profiles have a 35 mm width, but their depths differ. The published 35 × 15 mm steel rail uses 1.5 mm nominal thickness; the 7.5 mm ranges have configuration-specific thicknesses. Check device fit and enclosure clearance rather than assuming interchangeability.
Can G32 rail replace a TS35 top hat rail?
Not by width alone. G32 has an asymmetric G-profile with 15/9 mm flange projections in this range. TS35 uses a top hat section. The mounted device must support the selected interface.
Which DIN rail lengths are available?
Lengths depend on the product. Most listed configurations offer 1 m and 2 m. The 35 × 7.5 mm steel standard-slot and long-slot configurations also list 0.5 m; the aluminium G32 rail lists 1 m. Use the length in the exact configuration row.
Are steel and aluminium rails interchangeable?
Do not assume so. Match the mounting geometry, thickness, fixing arrangement and project material requirements. The published options include different slot sizes and length choices.
Does blue-white mean a particular corrosion rating?
No corrosion rating is established by that appearance description. Specify the required surface treatment and ask for supporting documentation for the quoted product.
Is DIN rail the same as a comb busbar?
No. This range provides mechanical mounting profiles. Comb busbars provide electrical connections between compatible devices. Select each component for its own function.
Can you supply cut lengths or a specific fixing pattern?
Send the cross-section, cut-length schedule, hole layout and quantities for review. Availability, tolerances, preparation, samples and commercial terms must be confirmed for the requested configuration.
Tôi nên bao gồm những gì trong yêu cầu báo giá?
Send the rail profile, material, thickness, slot dimensions, length and quantities, plus the device mounting reference and panel drawing. Include the exact model quantities, delivery destination and required documentation.
Bạn có thể xem xét nhãn và bao bì tùy chỉnh không?
Gửi mã bộ phận của bạn, bản vẽ nhãn, số lượng đóng gói và yêu cầu vận chuyển. Tính khả thi, yêu cầu mẫu, số lượng tối thiểu và thời gian giao hàng được xác nhận cho các mẫu được yêu cầu.