SP11 IP68 Konektor Bundar Tahan Air
YOCL ELECTRIC SP11 konektor melingkar kedap air menggabungkan penguncian berulir dengan terminasi solder untuk koneksi kabel dan panel.
- Kontak: 2 / 3 / 4 / 5.
- Perlindungan: IP68.
- Diameter kabel: 4–6.5 mm.
- Format: steker kabel, soket kabel inline, soket panel mur belakang, dan soket flensa.
- Peringkat: pilih arus dan AC tegangan kerja berdasarkan jumlah kontak dalam tabel spesifikasi.
Tinjauan
YOCL ELECTRIC SP11 konektor melingkar kedap air menyediakan penguncian berulir dan terminasi solder untuk koneksi kabel dan panel yang dapat dilepas. Keluarga ini menggunakan kontak tembaga berlapis emas, rumah termoplastik, dan isolator PPS, dengan peringkat perlindungan IP68.
Seri ini mencakup empat susunan kontak: 2, 3, 4, dan 5 kontak. Steker kabel 45 mm terhubung ke soket kabel inline, soket panel mur belakang, atau soket flensa, memungkinkan keluarga konektor yang sama untuk melayani koneksi kabel-ke-kabel dan kabel-ke-panel.
Fitur
- Penguncian berulir: kopling sekrup menahan separuh konektor yang saling terhubung.
- Opsi kontak: Kontak 2 / 3 / 4 / 5, dengan peringkat listrik yang dipilih berdasarkan susunan kontak.
- Kontak tembaga berlapis emas: terminasi solder untuk konfigurasi yang tercantum di halaman ini.
- Format kabel dan panel: steker kabel, soket kabel inline, soket panel mur belakang, dan soket flensa.
- Pemilihan segel kabel: Diameter kabel 4–6.5 mm.
- Rentang suhu: −40°C hingga +85°C, dengan 500 siklus penyambungan yang tercantum untuk seri ini.
Spesifikasi Teknis
Spesifikasi Umum
| Parameter | Spesifikasi |
|---|---|
| Merek | YOCL ELEKTRIK |
| Seri | SP11 |
| Susunan kontak | 2 / 3 / 4 / 5 kontak |
| Kopling | Penguncian berulir |
| Terminasi | Solder |
| Bahan housing | Termoplastik PC / PA66 |
| Rating kebakaran material rumah | V-0 |
| Bahan isolator | PPS termoplastik |
| Bahan kontak | Tembaga berlapis emas |
| Rating proteksi | IP68 |
| Rentang suhu | −40°C hingga +85°C |
| Siklus penyambungan | 500 |
| Resistansi isolasi | 2000 MΩ |
| Segel kabel standar | 4–6.5 mm |
Rating Listrik berdasarkan Susunan Kontak
| Kontak | Arus terukur | Tegangan kerja | Diameter kontak × kuantitas | Luas penampang konduktor maksimum | Referensi katalog AWG |
|---|---|---|---|---|---|
| 2 | 5 A | 180 V AC | Ø1.0 mm × 2 | ≤0.75 mm² | 18 |
| 3 | 5 A | 180 V AC | Ø1.0 mm × 3 | ≤0.75 mm² | 18 |
| 4 | 3 A | 125 V AC | Ø0.7 mm × 4 | ≤0.5 mm² | 20 |
| 5 | 5 A | 125 V AC | Ø0.7 mm × 5 | ≤0.5 mm² | 20 |
Choose the current, working voltage and conductor limit from the same row. The AWG values are the paired references supplied with the metric wire sizes; the conductor limit is expressed in mm².
Dielectric Withstand and Contact Resistance
| Kontak | Tegangan tahan dielektrik | Resistansi kontak |
|---|---|---|
| 2 | 1000 V AC for 1 minute | 5 mΩ |
| 3 | 1000 V AC for 1 minute | 5 mΩ |
| 4 | 1000 V AC for 1 minute | 10 mΩ |
| 5 | 1000 V AC for 1 minute | 10 mΩ |
The dielectric withstand value is a one-minute test voltage, separate from the working voltage.
Dimensi
Dimensi Badan Konektor
| Format | Keluarga model | Drawing dimensions |
|---|---|---|
| Steker kabel | SP1110 | 45.0 mm length; 16.6 mm front width |
| Inline cable socket | SP1111 | 46.5 mm length; Ø17.3 mm front diameter |
| Rear-nut panel socket | SP1112 | 18.5 mm length; Ø17.3 mm front diameter; M11 × 1 mounting thread |
| Flange socket | SP1113 | 18.5 mm length; 19.5 mm front height; Ø3.5 mm mounting holes; 22.1 mm body mounting-hole pitch |
Panel Mounting Dimensions
| Format | Panel opening | Detail pemasangan |
|---|---|---|
| Rear-nut panel socket | Ø11.0 mm opening with 9.9 mm across flats | Maximum panel thickness: 3.5 mm |
| Flange socket | Ø13.0 mm centre opening | Two Ø3.5 mm holes at 22.0 mm pitch |
Body dimensions and panel openings are listed separately. The flange body drawing gives 22.1 mm mounting-hole pitch, while the panel opening drawing gives 22.0 mm; use the panel opening dimensions when planning the panel.
Format Konektor dan Penamaan Model
| Format | Pin-contact designation | Socket-contact designation | Matching format |
|---|---|---|---|
| Steker kabel | SP1110/P | SP1110/S | Mates with SP1111, SP1112 or SP1113 of the corresponding contact arrangement |
| Inline cable socket | SP1111/P | SP1111/S | Cable-to-cable connection with SP1110 |
| Rear-nut panel socket | SP1112/P | SP1112/S | Panel connection with SP1110 |
| Flange socket | SP1113/P | SP1113/S | Flange-mounted panel connection with SP1110 |
P identifies pin contacts and S identifies socket contacts. Both contact types are offered in each listed body format; choose complementary contacts and the same contact count for the mating pair. The designations above identify the connector format; specify the contact count separately in the enquiry.
Panduan Pemilihan
- Select SP11 and the required contact count.
- Check the rated current, AC working voltage and conductor cross-section together in the electrical table.
- Choose a cable-to-cable or cable-to-panel connection and select the corresponding body format.
- Select the 4–6.5 mm cable seal against the actual cable outer diameter.
- Specify complementary P and S contacts and check the applicable body and panel dimensions.
Informasi Pemesanan
For a quotation, provide the SP11 model family, contact count, P or S contact type, cable outer diameter, mating connector format and required quantity. For panel sockets, include the panel thickness and mounting format.