BZNP Nylon 11 Coated Stainless Steel Cable Ties
BZNP stainless steel self-locking ball-lock cable ties with Nylon 11 coating for an additional barrier at band edges and contact surfaces.
- Listed steel grades: 201, 304 and 316.
- 25 width/length entries.
- Working temperature: −80 °C to +150 °C.
- Minimum tensile strength: 1,000 N at 4.6 and 7.9 mm; 3,115 N at 12.7 mm.
- Recommended tools: CT02 and HT-338, depending on width.
Overview
The YOCL ELECTRIC BZNP Nylon 11 Coated Stainless Steel Cable Ties use a self-locking ball mechanism and a Nylon 11 coating. The coating provides an additional contact barrier at the band edges and between the stainless steel band and bundled materials.
The supplied product data lists stainless steel grades 201, 304 and 316. BZNP has its own width, thickness, length and tensile-strength values; select from the tables below.
Features
- Ball-lock mechanism: Self-locking construction for cable and bundle fastening.
- Nylon 11 coating: Adds a barrier at band contact surfaces and edges.
- Steel grade options: 201, 304 and 316, as listed in the supplied data.
- Model-specific dimensions: 25 width and length entries with corresponding strength and tooling information.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BZNP |
| Locking mechanism | Self-locking ball lock |
| Stainless steel grades listed | 201; 304; 316 |
| Coating | Nylon 11 |
| Working temperature | −80 °C to +150 °C |
| Appearance | Black band with a metallic line and exposed metallic locking head, as described in the source |
| Width options | 4.6 mm; 7.9 mm; 12.7 mm |
| Listed thickness options | 0.25 mm; 0.30 mm; 0.40 mm |
The source describes the band as semi-coated and shows a metallic line through the coated band. This product is not described as fully coated.
Dimension
Width, Strength and Tool Selection
| Width W (mm) | Listed thickness options (mm) | Minimum tensile strength (N) | Minimum tensile strength (lbf) | Recommended installation tools |
|---|---|---|---|---|
| 4.6 | 0.25 | 1,000 | 225 | CT02; HT-338 |
| 7.9 | 0.25 | 1,000 | 225 | CT02; HT-338 |
| 12.7 | 0.30; 0.40 | 3,115 | 700 | CT02 |
Size Table
Primary dimensions are in millimetres. Inch values are rounded conversions from the stated millimetre dimensions.
| Size W × L (mm) | Width W (mm) | Length L (mm) | Width (inch) | Length (inch) |
|---|---|---|---|---|
| 4.6×100 | 4.6 | 100 | 0.18 | 3.9 |
| 4.6×150 | 4.6 | 150 | 0.18 | 5.9 |
| 4.6×200 | 4.6 | 200 | 0.18 | 7.9 |
| 4.6×250 | 4.6 | 250 | 0.18 | 9.8 |
| 4.6×300 | 4.6 | 300 | 0.18 | 11.8 |
| 4.6×350 | 4.6 | 350 | 0.18 | 13.8 |
| 4.6×400 | 4.6 | 400 | 0.18 | 15.7 |
| 4.6×450 | 4.6 | 450 | 0.18 | 17.7 |
| 4.6×500 | 4.6 | 500 | 0.18 | 19.7 |
| 4.6×600 | 4.6 | 600 | 0.18 | 23.6 |
| 4.6×800 | 4.6 | 800 | 0.18 | 31.5 |
| 7.9×200 | 7.9 | 200 | 0.31 | 7.9 |
| 7.9×300 | 7.9 | 300 | 0.31 | 11.8 |
| 7.9×350 | 7.9 | 350 | 0.31 | 13.8 |
| 7.9×450 | 7.9 | 450 | 0.31 | 17.7 |
| 7.9×550 | 7.9 | 550 | 0.31 | 21.7 |
| 7.9×700 | 7.9 | 700 | 0.31 | 27.6 |
| 7.9×850 | 7.9 | 850 | 0.31 | 33.5 |
| 12.7×350 | 12.7 | 350 | 0.50 | 13.8 |
| 12.7×400 | 12.7 | 400 | 0.50 | 15.7 |
| 12.7×500 | 12.7 | 500 | 0.50 | 19.7 |
| 12.7×600 | 12.7 | 600 | 0.50 | 23.6 |
| 12.7×750 | 12.7 | 750 | 0.50 | 29.5 |
| 12.7×900 | 12.7 | 900 | 0.50 | 35.4 |
| 12.7×1100 | 12.7 | 1100 | 0.50 | 43.3 |
Thickness conversions: 0.25 mm ≈ 0.010 inch; 0.30 mm ≈ 0.012 inch; 0.40 mm ≈ 0.016 inch. The 12.7 mm width group lists 0.30 and 0.40 mm as shared thickness options without mapping them to individual lengths.
Bundle diameter D is illustrated but no numerical bundle range is supplied. No maximum bundle diameter is assigned here.
Ordering Information
Specify the model, band width and length, listed thickness option, stainless steel grade and required operating conditions. Select the installation tool from the width-specific table.
The supplied table does not map individual steel grades and thickness options to separate strength-test configurations. Request the data for the actual supplied configuration where a specific material or thickness is required.