IP44 Saluran Masuk Peralatan Industri

YOCL ELECTRIC IP44 inlet alat industri dalam versi 16 A dan 32 A. Pilih kontak 2P+E, 3P+E atau 3P+N+E, pemasangan panel atau permukaan dan kapasitas konduktor yang sesuai dari tabel model.

Tanyakan tentang produk ini

Tinjauan

YOCL ELECTRIC IP44 inlet alat industri menyediakan koneksi daya pria pada mesin, peralatan distribusi, dan rumah peralatan. Keluarga ini mencakup versi 16 A dan 32 A dalam konfigurasi 2P+E, 3P+E, dan 3P+N+E. Inlet panel lurus dan desain inlet permukaan tertutup dikelompokkan di sini sehingga antarmuka suplai dapat dipilih bersama dengan pengaturan pemasangannya. Konektor kabel wanita yang cocok menyediakan koneksi kabel yang dapat dilepas.

Fitur

Versi IP44 untuk koneksi industri tahan percikan.
Desain panel lurus dalam housing standar dan K, ditambah desain permukaan dengan muka konektor bersudut.
Pilihan 16 A dan 32 A dengan rentang konduktor yang dinyatakan untuk setiap model.
Posisi kontak bumi 6h pada model yang terdaftar.
Housing kontak biru dan merah membedakan konfigurasi listrik yang terdaftar.

Spesifikasi Teknis

Parameter	Spesifikasi
Merek	YOCL ELEKTRIK
Jenis produk	Inlet industri / inlet peralatan pria
Tingkat proteksi	IP44
Pilihan arus terukur	16 A, 32 A
Konfigurasi kontak	2P+E; 3P+E; 3P+N+E
Posisi kontak-bumi	6 jam
Pemasangan	Pemasangan panel atau pemasangan permukaan tertutup, tergantung model
Antarmuka kabel pasangan	Konektor kabel industri wanita pasangan
Kapasitas konduktor	Spesifik model; lihat tabel pemilihan

Pemilihan Model

Model	Pemasangan / rumah	Arus (A)	Kontak	Tegangan	Posisi bumi	Rumah kontak	Conductor cross-section (mm²)
NM-613K	Straight panel inlet, K housing	16	2P+E	220–240 V	6 jam	Biru	1–2.5
NM-623K	Straight panel inlet, K housing	32	2P+E	220–240 V	6 jam	Biru	2.5–6
NM-614K	Straight panel inlet, K housing	16	3P+E	380–415 V	6 jam	Merah	1–2.5
NM-624K	Straight panel inlet, K housing	32	3P+E	380–415 V	6 jam	Merah	2.5–6
NM-615K	Straight panel inlet, K housing	16	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	1–2.5
NM-625K	Straight panel inlet, K housing	32	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	2.5–6
NM-613	Straight panel inlet	16	2P+E	220–240 V	6 jam	Biru	1–2.5
NM-623	Straight panel inlet	32	2P+E	220–240 V	6 jam	Biru	2.5–6
NM-614	Straight panel inlet	16	3P+E	380–415 V	6 jam	Merah	1–2.5
NM-624	Straight panel inlet	32	3P+E	380–415 V	6 jam	Merah	2.5–6
NM-615	Straight panel inlet	16	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	1–2.5
NM-625	Straight panel inlet	32	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	2.5–6
NM-513	Surface inlet with angled face	16	2P+E	220–240 V	6 jam	Biru	1–2.5
NM-523	Surface inlet with angled face	32	2P+E	220–240 V	6 jam	Biru	2.5–6
NM-514	Surface inlet with angled face	16	3P+E	380–415 V	6 jam	Merah	1–2.5
NM-524	Surface inlet with angled face	32	3P+E	380–415 V	6 jam	Merah	2.5–6
NM-515	Surface inlet with angled face	16	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	1–2.5
NM-525	Surface inlet with angled face	32	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	2.5–6
NM-513L	Surface inlet with angled face — L housing	16	2P+E	220–240 V	6 jam	Biru	1–2.5
NM-523L	Surface inlet with angled face — L housing	32	2P+E	220–240 V	6 jam	Biru	2.5–6
NM-514L	Surface inlet with angled face — L housing	16	3P+E	380–415 V	6 jam	Merah	1–2.5
NM-524L	Surface inlet with angled face — L housing	32	3P+E	380–415 V	6 jam	Merah	2.5–6
NM-515L	Surface inlet with angled face — L housing	16	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	1–2.5
NM-525L	Surface inlet with angled face — L housing	32	3P+N+E	220–380 V / 240–415 V	6 jam	Merah	2.5–6

P denotes a phase contact, N neutral and E protective earth. A dash means that no voltage is assigned in this selection table.

Dimensi

Model	Lettered outline dimensions (mm)	Fixed mounting geometry
NM-613K	a=50, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-623K	a=59, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-614K	a=50, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-624K	a=59, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-615K	a=50, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-625K	a=59, b=60	Flange width × height (mm): 76 × 76; Fixing centres (mm): 60 × 60; Panel opening diameter (mm): 65; Fixing hole diameter (mm): 5
NM-613	a=41	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-623	a=51	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-614	a=41	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-624	a=51	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-615	a=41	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-625	a=51	Flange width × height (mm): 70 × 70; Fixing centres (mm): 56 × 56; Panel opening diameter (mm): 46; Fixing hole diameter (mm): 5
NM-513	a=125, b=71, c=43, Φ=3–18	—
NM-523	a=139, b=81, c=58, Φ=3–18	—
NM-514	a=130, b=72, c=49.5, Φ=3–18	—
NM-524	a=139, b=81, c=58, Φ=3–18	—
NM-515	a=130, b=77, c=55.5, Φ=3–18	—
NM-525	a=143, b=83, c=63, Φ=3–18	—
NM-513L	a=125, b=71, c=43, Φ=3–18	—
NM-523L	a=139, b=81, c=58, Φ=3–18	—
NM-514L	a=130, b=72, c=49.5, Φ=3–18	—
NM-524L	a=139, b=81, c=58, Φ=3–18	—
NM-515L	a=130, b=77, c=55.5, Φ=3–18	—
NM-525L	a=143, b=83, c=63, Φ=3–18	—

Use the lettered dimensions with the matching inlet outline. Flange geometry and housing size differ between body versions; select the complete model code when checking installation space.

IP44 Industrial Appliance Inlets dimension drawing

Pemilihan Koneksi

Match rated current, contact configuration, voltage and earth-contact position at both sides of the connection. Select panel or surface mounting before comparing the housing dimensions. The IP rating applies to the correctly assembled connection with its compatible mating interface; maintain the specified sealing and closure arrangement.

Informasi Pemesanan

Send YOCL ELECTRIC the full model code, required quantity, supply voltage, contact configuration and installation arrangement. Include conductor cross-section and the mating cable connector when requesting a complete equipment power connection.