LT-1/LT-2/LT-3 Inline Lever Connectors

YOCL ELECTRIC LT-1, LT-2 and LT-3 inline lever connectors provide one, two and three catalogue P formats.

250 V rated voltage; 32 A rated current
0.5–4 mm² listed conductor cross-section
11–12 mm stripping length
3 listed model options

Overview

YOCL ELECTRIC LT-1, LT-2 and LT-3 inline lever connectors provide one, two and three catalogue P formats. Each model has a 250 V, 32 A rating, with lever controls shown at both ends of the grey connector body.

Features

Three inline body formats with lever controls.
Catalogue P designations: LT-1 1P, LT-2 2P and LT-3 3P.
250 V rated voltage and 32 A rated current.
0.5–4 mm² conductor range and 11–12 mm stripping length.

Technical Specifications

Parameter	Specification
Models	LT-1, LT-2, LT-3
Rated voltage	250 V
Rated current	32 A
Conductor cross-section	0.5–4 mm²
Listed withstand voltage	4 kV
Ambient temperature	−40 °C to +105 °C
Stripping length	11–12 mm
Plastic parts	PC
Spring material	S301
Contact material	T2
Plastic material flammability reference	UL94 V-2
Catalogue reference standard	IEC; specific standard number not stated

The rated-voltage and withstand-voltage entries do not specify AC or DC. The withstand test duration is not stated. The conductor range is not divided into separate conductor classes.

Dimension

The catalogue gives the following L × W × H values without stating a measurement unit. The Catalogue P designation column retains the source label; it does not establish the number of electrically isolated circuits.

Model	Catalogue P designation	Catalogue L × W × H (unit not stated)
LT-1	1P	30 × 7.8 × 10
LT-2	2P	30 × 20.5 × 10.5
LT-3	3P	30 × 25.9 × 10.5

Model Selection

Compare the 1P, 2P and 3P model envelopes before choosing LT-1, LT-2 or LT-3. Coloured levers identify visible controls in the pictures; the reference does not assign mandatory phase, polarity or circuit labels to those colours.

Ordering Information

Provide the exact model, conductor type and cross-section, required colour where applicable, and quantity. Include the required connection arrangement in the enquiry.