Cable dimensions
Provide conductor size in mm² or AWG and the insulated outside diameter. For flat wires, include width and thickness; match the exact model's fit range.
Cable Markers
Manufacturer
Identify wires and cables with PVC markers, clip-on characters, heat shrink markers and marking accessories. Compare the installation method, cable fit and required legend, then select the series for your wiring schedule.
Cable Markers series
Open full catalogue
201–205 Cable Marker Sleeves
LT Series Cable Markers
MB Cable Marker Boxes
MS Cable Marker Strips
PP Marking Strips
SF-1 Cable Marker Holders
SM Type Clip-On Cable Markers
YOCL ELECTRIC EC PVC Cable Markers
YOCL ELECTRIC EC-J Flat Cable Markers
YOCL ELECTRIC Halogen-Free Heat Shrink Cable Markers
YOCL ELECTRIC MEC Round Cable Markers
Find the right cable identification format
| Construction | Selection focus | Series reference |
|---|---|---|
| PVC cable markers | EC and MEC soft PVC markers use a flexible inner profile. Choose the model against its wire-size table, then specify numbers, letters or symbols. | EC · MEC |
| Flat cable markers | EC-J PVC markers are listed for round or flat wires and conductor sizes of 2–8 mm². Confirm the insulated wire dimensions before selecting the fit. | EC-J |
| Clip-on cable markers | SM rigid POM markers can be fitted after cable installation. SM-1 to SM-4 cover listed conductor sizes of 1.5, 2.5, 4 and 6 mm² respectively. | SM-1 · SM-2 · SM-3 · SM-4 |
| Marker sleeves & LT markers | Compare the LT series and 201–205 sleeves by their individual size tables. For sleeves, recommended cable diameter and maximum diameter are separate values. | LT series · 201–205 |
| Heat shrink cable markers | The listed halogen-free range specifies low-smoke and flame-retardant characteristics with a 125°C rated temperature. Confirm size, printing compatibility and processing requirements for your order. | Halogen-free heat shrink markers |
| Strips, holders & marker boxes | Combine the identification area and fixing format you need. Compare PP marking strips, MS strips, SF-1 holders and MB closing-cover marker boxes. | PP · MS · SF-1 · MB |
Choose by fit, installation and legend.
Conductor cross-section does not define the outside diameter of an insulated cable. Check both the product table and the actual wire before ordering.
Installation stage
For an already terminated wire, consider the SM clip-on format. Check cable-end access and the fitting method for sleeves, PVC and heat shrink markers.
Marking content
Specify digits, letters, symbols, blanks or a custom legend. EC, MEC and EC-J list character options; do not assume identical legends or printing options across every series.
Service conditions
State temperature, exposure and any material requirements. Ratings belong to the selected series; confirm relevant documentation and marking durability for the intended environment.
Send your cable markers
requirements.
Send your marker series, insulated wire dimensions, legend schedule and quantities. Include colours, packing preferences and any printing or material requirements.
Prepare an enquiryPrepare your cable identification order.
Agree the specification and required evidence before placing your order.
Explore manufacturingSeries & size schedule
List the product model and wire dimensions for each circuit or harness group. Verify samples on the actual cable insulation.
Characters & quantities
Provide the quantity per character or complete legend. State whether you need assorted sets, repeated codes or blank markers.
Printing & accessory fit
For printed markers, confirm printer, ribbon and processing compatibility. For strips, boxes and holders, check insert dimensions and mounting clearance.
Packing & approval
Packing varies by model: rolls, boxes, bags or plates. Agree packing quantities, sample approval and delivery destination before production.
OEM & PACKING
Your specification.
Your packing plan.
Build your cable markers order around the selected models, identification and supply requirements.
Model schedule
List the product model and wire dimensions for each circuit or harness group. Verify samples on the actual cable insulation.
Labels & identification
Provide part numbers, label artwork and any batch or traceability information required for the order.
Pack quantities
Specify quantities per model, individual packs, outer cartons and delivery destination.
Cable Markers
buying questions.
What is the difference between cable markers and marker cable ties?
Cable markers identify individual wires or cables using characters, sleeves, strips or holders. Marker cable ties combine a bundling tie with a marking area and are a separate product family. Choose according to whether you need identification, bundling or both.
Can I install cable markers after terminating the wire?
SM clip-on cable markers are listed for fitting after cable installation. For other formats, confirm the installation method and whether cable-end access is needed before selecting a model.
Should I select markers by conductor size or cable diameter?
Use the exact model's sizing table and check the insulated cable dimensions. Two cables with the same conductor cross-section can have different insulation diameters. Do not interchange mm² conductor area and mm outside diameter.
Which characters are available?
EC, MEC and EC-J listings include 0–9, A–Z and symbols such as plus, minus and slashes; the EC range also lists blanks. SM lists numbers, letters and special symbols. Confirm the required character and quantity for your chosen series.
Are all cable markers halogen-free or rated to 125°C?
No. Those characteristics are listed for the halogen-free heat shrink marker product, not for all PVC, POM, nylon or PP identification products. Check the selected product's specification.
Can heat shrink markers be used with any label printer?
Do not assume universal compatibility. Confirm marker size, supply format, printer and ribbon suitability, shrink conditions and required print durability before ordering.
How do I choose marking strips and holders?
Match the strip or insert dimensions to the holder and the available installation space. PP strips list 12, 15, 20 and 25 mm lengths with a common 4 mm width; MS strips list 65–200 mm lengths and 9.5 mm width. These are different formats, not interchangeable sizes.
Are cable markers supplied in the same pack quantity?
No. Quantities vary by series and size, with rolls, bags, boxes and plates used across the range. Use the individual model's packing table when preparing your purchase quantities.
What should I include in a quotation request?
Send your marker series, insulated wire dimensions, legend schedule and quantities. Include colours, packing preferences and any printing or material requirements. Include the exact model quantities, delivery destination and required documentation.
Can you review custom labels and packaging?
Send your part numbers, label artwork, pack quantities and shipment requirements. Feasibility, sample requirements, minimum quantities and lead time are confirmed for the requested models.