Contacts & electrical load
Select contact count together with its current, voltage and conductor section. LP-24 ordering codes do not distinguish every current/conductor configuration; request confirmation.
LP Quick-Lock Waterproof Connectors
Manufacturer
LP-12, LP-16, LP-20 and LP-24 circular connectors combine a pushbutton snap lock with screw clamp termination. Choose cable-to-cable or panel-mounted formats, then match contact count, electrical rating and cable seal range. IP68 applies in the connected state.
Compare the four LP sizes
| Construction | Selection focus | Series reference |
|---|---|---|
| LP-12 · Compact two-contact | 2 contacts, 5 A / 125 V and 0.34–0.5 mm² conductors. Listed cable jacket diameter Ø3.5–4.5 mm; metal housings across the listed formats. | LP-12 |
| LP-16 · 2–5 contacts | 2/3 contacts: 10 A / 400 V. 4 contacts: 5 A / 400 V. 5 contacts: 5 A / 250 V. Select the corresponding conductor section and a listed cable seal range. | LP-16 |
| LP-20 · Power and signal | 2–5 contacts. The 2/3/4-contact configurations list 25 A / 500 V and 2.5–4.0 mm² conductors. Confirm the separate 5-contact specification; do not transfer these ratings to it. | LP-20 |
| LP-24 · Larger configurations | 2–6 contacts. 2/3/4-contact groups list 25 A or 30 A configurations; 5/6-contact groups list 10 A. Match the paired conductor section and confirm voltage before ordering. | LP-24 |
LP connector dimension drawings
Original drawings from each product detail page. Open a drawing to inspect it at full size.
LP-12
View specifications ↗
LP-16
View specifications ↗
LP-20
View specifications ↗
LP-24
View specifications ↗REF lengths are reference dimensions. Connector body dimensions and mounting threads are not panel-cutout specifications; verify the selected socket drawing and installation tolerances.
Specify both sides of the mating pair.
Series size, contact count and cable diameter are separate choices. Use the exact configuration, not a series-wide maximum.
Cable jacket & seal
Measure cable outside diameter independently from conductor cross-section. Choose the individual seal range listed for the series, not simply its overall minimum-to-maximum span.
Format & contact gender
Choose cable plug, inline docking socket, single-hole panel socket or four-hole flange socket. Male/female describes the electrical contacts; specify it separately from the housing format.
Mounting & protection
Check the original dimension drawing and panel installation requirements. A mounting thread is not the panel-cutout diameter. Confirm IP68 test conditions for the assembled connection.
Send your lp quick-lock waterproof connectors
requirements.
Send both LP part numbers, contact count, current and voltage requirements, conductor section, cable jacket diameter, housing configuration and quantities.
Prepare an enquiryTurn the LP selection into an order.
Agree the specification and required evidence before placing your order.
Explore manufacturingSeries & full code
Provide LP-12, LP-16, LP-20 or LP-24 and the complete code for each mating component. Do not order using a code-pattern placeholder.
Interface arrangement
Specify contact gender and cable or panel format. Panel codes distinguish single-hole and flange formats using their suffixes.
Electrical & cable schedule
Pair current and voltage with conductor size and cable seal selection. Identify any missing rating for confirmation.
Drawing & sample approval
Review the selected socket drawing, mounting space and cable routing. Approve the mating pair and required documentation before bulk supply.
OEM & PACKING
Your specification.
Your packing plan.
Build your lp quick-lock waterproof connectors order around the selected models, identification and supply requirements.
Model schedule
Provide LP-12, LP-16, LP-20 or LP-24 and the complete code for each mating component. Do not order using a code-pattern placeholder.
Labels & identification
Provide part numbers, label artwork and any batch or traceability information required for the order.
Pack quantities
Specify quantities per model, individual packs, outer cartons and delivery destination.
LP Quick-Lock Waterproof Connectors
buying questions.
What sizes are included in the LP connector range?
The current range contains LP-12, LP-16, LP-20 and LP-24. LP-12 lists 2 contacts; LP-16 and LP-20 list 2–5; LP-24 lists 2–6. Ratings depend on the selected contact configuration.
How does the LP locking mechanism work?
The listed products use a pushbutton snap-lock mechanism with screw clamp wire termination. Follow the selected product's mating, release and wiring instructions.
Can different LP sizes mate with one another?
No cross-size compatibility is claimed. Specify a matching series, contact arrangement and mating format, and confirm both part numbers.
Does IP68 apply when the connectors are disconnected?
The product listings specify IP68 in the connected state. Do not assume the same protection for disconnected contacts or infer continuous immersion suitability without the applicable test conditions.
Are all LP connectors rated 500 V or 30 A?
No. LP-12 lists 5 A / 125 V; LP-16 ratings vary by contacts; LP-20 lists 25 A / 500 V for 2–4 contacts. LP-24 lists paired current/conductor configurations but no voltage in that table. Confirm the exact configuration.
Where can I find the mounting dimensions?
The dimension section on this page directly references the four original drawings from the product details. Open a drawing at full size and use the selected socket's installation drawing for panel cutouts and tolerances.
Does male or female describe the plug housing?
Here it identifies the electrical contact gender. Connector format and contact gender are separate specifications, so include both when requesting a mating pair.
What should I include in a quotation request?
Send both LP part numbers, contact count, current and voltage requirements, conductor section, cable jacket diameter, housing configuration and quantities. Include the exact model quantities, delivery destination and required documentation.
Can you review custom labels and packaging?
Send your part numbers, label artwork, pack quantities and shipment requirements. Feasibility, sample requirements, minimum quantities and lead time are confirmed for the requested models.