LT-12 Series Single-Pole Lever Connectors

YOCL ELECTRIC LT-12 series single-pole lever connectors include LT-12, LT-13, LT-14 and LT-15.

450 V rated voltage; 32 A rated current
0.5–4 mm² listed conductor cross-section
8–10 mm stripping length
4 listed model options
All four models are listed as 1P

Inquire about this product

Overview

YOCL ELECTRIC LT-12 series single-pole lever connectors include LT-12, LT-13, LT-14 and LT-15. All four are listed as 1P, with progressively wider housings and differing visible entry layouts.

Features

LT-12, LT-13, LT-14 and LT-15 are all listed as 1P.
Individual orange lever controls shown for the entries.
450 V rated voltage and 32 A rated current.
PA66 / PC plastic parts and an 8–10 mm stripping length.

Technical Specifications

Parameter	Specification
Models	LT-12, LT-13, LT-14, LT-15
Rated voltage	450 V
Rated current	32 A
Conductor cross-section	0.5–4 mm²
Listed withstand voltage	4 kV
Ambient temperature	−40 °C to +105 °C
Stripping length	8–10 mm
Plastic parts	PA66 / PC
Spring material	S301
Contact material	T2
Catalogue reference standard	IEC; specific standard number not stated

The rated-voltage and withstand-voltage entries do not specify AC or DC. The withstand test duration is not stated. The conductor range is not divided into separate conductor classes.

Dimension

The catalogue gives the following L × W × H values without stating a measurement unit. The Catalogue P designation column retains the source label; it does not establish the number of electrically isolated circuits.

Model	Catalogue P designation	Catalogue L × W × H (unit not stated)
LT-12	1P	31.5 × 13.9 × 13.5
LT-13	1P	31.5 × 18.9 × 13.5
LT-14	1P	31.5 × 23.9 × 13.5
LT-15	1P	31.5 × 28.9 × 13.5

Model Selection

Use the model and its body width to select the required entry layout. The model numbers 12, 13, 14 and 15 do not represent the listed pole count: each remains 1P in the catalogue. Conductor cross-section is 0.5–4 mm² for every model.

Ordering Information

Provide the exact model, conductor type and cross-section, required colour where applicable, and quantity. Include the required connection arrangement in the enquiry.