PCT-112/PCT-112D Inline Lever Connectors

YOCL ELECTRIC PCT-112 and PCT-112D inline lever connectors are both listed as 1P with a 250 V, 32 A rating.

250 V rated voltage; 32 A rated current
0.5–4 mm² listed conductor cross-section
11–12 mm stripping length
2 listed model options
Plain PCT-112 and bracketed PCT-112D bodies

Inquire about this product

Overview

YOCL ELECTRIC PCT-112 and PCT-112D inline lever connectors are both listed as 1P with a 250 V, 32 A rating. PCT-112D adds the mounting bracket and fixing ear shown around the connector body, while PCT-112 uses the plain body format.

Features

Single-pole inline connector format.
Lever controls shown at opposite ends.
Plain PCT-112 and bracketed PCT-112D body options.
0.5–4 mm² conductor range and 11–12 mm stripping length.

Technical Specifications

Parameter	Specification
Models	PCT-112, PCT-112D
Rated voltage	250 V
Rated current	32 A
Conductor cross-section	0.5–4 mm²
Listed withstand voltage	4 kV
Ambient temperature	−40 °C to +105 °C
Stripping length	11–12 mm
Plastic parts	PC
Spring material	S301
Contact material	T2
Plastic material flammability reference	UL94 V-2
Catalogue reference standard	IEC; specific standard number not stated

The rated-voltage and withstand-voltage entries do not specify AC or DC. The withstand test duration is not stated. The conductor range is not divided into separate conductor classes.

Dimension

The catalogue gives the following L × W × H values without stating a measurement unit. The Catalogue P designation column retains the source label; it does not establish the number of electrically isolated circuits.

Model	Catalogue P designation	Catalogue L × W × H (unit not stated)
PCT-112	1P	39.3 × 25.95 × 14.4
PCT-112D	1P	39.3 × 37.45 × 17.5

Model Selection

Choose PCT-112 for the plain body or PCT-112D where the bracketed format is needed. The D version has a wider and taller listed envelope. Fixing-hole dimensions and the required fastener are not specified in the reference data.

Ordering Information

Provide the exact model, conductor type and cross-section, required colour where applicable, and quantity. Include the required connection arrangement and mounting interface in the enquiry.