Insertion & extraction force
Evaluates mating and withdrawal forces. Review the test method, conditioning and acceptance criteria for the selected connector.
Industrial Plugs & Sockets
Manufacturer
Build a matching power connection with the right plug, socket and mounting format. Explore IP44 and IP67 product families, panel and surface installations and cable couplers. Confirm every rating against the selected model.
Industrial Plugs & Sockets series
Open full catalogue
IP44 Industrial Appliance Inlets
IP44 Industrial Plugs
IP67 Industrial Plugs
IP44 Angled Panel-Mounted Sockets
IP44 Straight Panel-Mounted Sockets
IP44 Surface-Mounted Industrial Sockets
IP67 Angled Panel-Mounted Sockets
IP67 Straight Panel-Mounted Sockets
IP67 Surface-Mounted Industrial Sockets
Industrial Multi-Outlet Socket Adapters
IP44 Industrial Cable Couplers
Choose the connection format
| Construction | Selection focus | Series reference |
|---|---|---|
| Cable plugs & appliance inlets | Choose a cable-mounted plug for a detachable lead or an appliance inlet for equipment mounting. The listed IP44 families cover 16 A and 32 A; the IP67 cable-plug family also lists 63 A and 125 A models. | IP44 plugs · IP67 plugs · Appliance inlets |
| Panel & surface sockets | Straight and angled panel sockets offer different cable routing and access. Surface-mounted sockets provide a rear mounting enclosure. Select the exact model for current, poles and panel dimensions. | Straight panel · Angled panel · Surface mounting |
| Cable couplers & outlet adapters | Cable couplers provide a female cable-end connection. Multi-outlet adapters split one input into several outlets; the input and assembly rating still limit the combined load. | IP44 cable couplers · Multi-outlet adapters |
Find your industrial connection.
Select catalogue parameters, choose a model and send it directly for quotation. No individual product page is needed.
SELECTED CATALOGUE MODEL
Request a Quote ↗This is a catalogue match, not a compatibility or installation approval.
Cannot find your configuration? Ask us to check your model or markings.
Always verify voltage, frequency, poles, rated current, earth-contact position and the complete mating interface against the product marking before installation. Cam-Lock, circular connectors, domestic interfaces and multi-outlet adapters require separate review.
Understand the socket clock position.
A visual reference for multipole connection selection—not a substitute for the selected model's markings and drawing.
Start with the supply
Identify the voltage, frequency and required pole arrangement from the installation requirements.
Check the complete mating interface
Confirm the plug and socket model, rated current and earth-contact position together. A similar colour or pin count does not establish compatibility.
Read the view correctly
This illustration is labelled as a socket front view. Do not use it as a rear wiring diagram or infer terminal wiring from the illustration.
Keep single-pole systems separate
The Cam-Lock range is not selected using this multipole clock-position chart. Refer to its own product information.
Testing the connection, not just the housing.
Review mechanical operation, electrical insulation and environmental performance when qualifying an industrial connection.
High & low temperature
Examines behaviour after specified temperature exposure. Request the applicable temperature limits and post-test checks rather than assuming a universal range.
Glow-wire behaviour
Assesses material response to a heated test element under specified conditions. Test temperature and the applicable material or component must be identified.
Temperature rise
Checks heating under the specified current and connection conditions. Cable size, termination and test configuration affect the result.
Water exposure
Illustrates a water-exposure test setup. Confirm the exact protection test, assembly condition and report scope for the chosen IP-rated product.
Insulation tracking
Illustrates assessment of surface tracking behaviour. CTI/PTI evidence relates to the tested material and conditions, not a blanket approval of every product.
Photographs illustrate test methods from supplied reference materials; they do not establish YOCL laboratory ownership or model certification. For dust exposure and other project requirements, request the applicable model-specific test scope and reports.
Match the complete connection.
Housing colour or appearance alone is not enough to specify a mating pair.
Current & supply
Specify the operating current, voltage and frequency. The 16–125 A range is not available in every family; check the selected model table and application conditions.
Poles & contact position
For multipole products, match 2P+E, 3P+E or 3P+N+E as required, together with the specified earth-contact clock position. Keep Cam-Lock selection separate.
Protection & installation
Select the stated IP44 or IP67 configuration and confirm the required mated or capped condition, cable sealing and installation instructions for that model.
Mounting & cable
Confirm straight, angled or surface mounting, panel cutout and fixing centres. Match conductor capacity and the complete cable jacket diameter to the selected cable-entry specification.
Send your industrial plugs & sockets
requirements.
Send the product family, model, quantity, current, voltage, frequency, pole arrangement, clock position, protection requirement and mounting or cable details.
Prepare an enquiryFrom model selection to an order-ready pair.
Agree the specification and required evidence before placing your order.
Explore manufacturingBoth mating references
Provide plug and socket references, or clear photographs of existing markings. Confirm the full interface rather than ordering by colour alone.
Installation information
Include panel drawings, cable dimensions, indoor/outdoor exposure and the expected operating conditions.
Required evidence
List applicable standards, approvals and test reports required by the project. Confirm their coverage for the exact model before approval.
Supply requirements
Confirm quantities, accessories, labelling, packaging and delivery destination. Review samples where interface fit needs verification.
OEM & PACKING
Your specification.
Your packing plan.
Build your industrial plugs & sockets order around the selected models, identification and supply requirements.
Model schedule
Provide plug and socket references, or clear photographs of existing markings. Confirm the full interface rather than ordering by colour alone.
Labels & identification
Provide part numbers, label artwork and any batch or traceability information required for the order.
Pack quantities
Specify quantities per model, individual packs, outer cartons and delivery destination.
Industrial Plugs & Sockets
buying questions.
What is the difference between a plug, socket and cable coupler?
The listed cable plugs have male contacts. Cable couplers provide a female cable-end connection. Panel and surface sockets mount to equipment or an enclosure. Appliance inlets are a separate equipment-mounted interface.
Are all products available from 16 A to 125 A?
No. The listed IP44 multipole families cover 16 A and 32 A. Selected IP67 families also include 63 A and 125 A. Refer to the individual model table; these ranges do not describe the Cam-Lock products.
Can I match a plug and socket by colour?
No. Confirm current size, voltage, frequency, pole arrangement, clock position and the specified mating interface. Colour is only one identification aid.
Does the clock-position diagram apply to Cam-Lock?
No. The illustration concerns multipole industrial socket arrangements. The single-pole Cam-Lock range requires its own mating and rating checks.
Can a multi-outlet adapter supply the full input current at every outlet simultaneously?
Do not assume that. Confirm the assembly rating, input limit, individual outlet limits and the intended combined load before selection.
Do the testing photographs prove certification?
No. They illustrate test methods in the supplied reference material. Certification and test-report applicability must be checked for the exact product, rating and configuration.
What should I include in a quotation request?
Send the product family, model, quantity, current, voltage, frequency, pole arrangement, clock position, protection requirement and mounting or cable details. Include the exact model quantities, delivery destination and required documentation.
Can you review custom labels and packaging?
Send your part numbers, label artwork, pack quantities and shipment requirements. Feasibility, sample requirements, minimum quantities and lead time are confirmed for the requested models.